NeoTV Streaming Player (NTV200) Installation Guide
© 2011 NETGEAR, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of NETGEAR, Inc. Technical Support Thank you for choosing NETGEAR. To register your product, get the latest product updates, or get support online, visit us at http://support.netgear.com. Phone (US only): 1-888-NETGEAR Phone (Other Countries): See http://support.netgear.
What’s Included in the Box NeoTV Streaming Player Ne Insta oTV S llati tream ing Power adapter Play er N T V20 0 Installation guide 3 Remote control with batteries
Front and Rear Views What You Need to Use Your NeoTV Player • TV with HDMI port • HDMI cable • Broadband Internet connection • A wireless or wired network • Device with Internet browser for service activation 4
Connect to the TV 1. Make sure that your TV is on and set to display the correct video input. 2. Connect an HDMI cable (sold separately) to the HDMI port on your player and to the HDMI IN port on your TV. HDMI supports 5.1 surround sound (if available). You do not need a separate audio cable. 3. Connect the power adapter to your player, and plug it into an electrical outlet.
Remote Control Batteries To use the remote control, remove the plastic strip beneath the batteries as shown. Connect to Your Home Network To use your player, you need to connect it to your home network with either a wireless or a wired connection. After you get your network ready, the onscreen guided setup helps you connect your player to your network. IMPORTANT: Do not place anything on top of your NeoTV player.
Wired Connection Use an Ethernet cable (sold separately) to connect your player to a LAN port on your router.
Wireless Connection If you are using a wireless connection, place your player within range of your wireless network. For best wireless reception, avoid enclosing your player in a cabinet. To connect wirelessly, you can use Wi-Fi Protected Setup (WPS), or you can select your network and enter its password using the onscreen setup guide. NeoTV Wireless router If you do not receive a strong signal during the onscreen setup, rotate your player or move it closer to your router.
Onscreen Guided Setup On your TV: • Use the remote control to follow the NeoTV onscreen setup instructions, which include setting the output resolution to the TV, and the standby timing, connecting to a network, and checking for the latest NeoTV software update. • Your player might download software updates or restart during setup. • Once you complete setup, select a channel icon (such as Netflix or Pandora) to enjoy the content.
Remote Control Home Power Select Up Left Right Play/Pause Down Return Menu Rewind Fast forward Next Previous Stop 10
Remote Control App NeoTV Remote app turns your iPhone or Android phone into a NeoTV Streaming Player remote control.
To Install the Remote Control App 1. Using your iPhone or Android smartphone, navigate to the Apple AppStore or Android Market, and search for NeoTV Remote. You can use the following QR codes to speed up this process: Apple App Store Android Market 2. Install the app on your phone. 3. Make sure that the phone is connected to the same WiFi network (SSID) as your NeoTV Streaming Player. 4. Launch the app, and it searches for your device and connects.
Technical Support Thank you for selecting NETGEAR products. After installing your device, locate the serial number on the label of your product and use it to register your product at www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Registration through our website is strongly recommended. Go to http://support.netgear.com for product updates and web support. GPL might be included in this product; to view the GPL license agreement, go to ftp://downloads.
NETGEAR, Inc.