Quick Start PowerLINE WiFi 1000 Models PL1000v2 and PLW1000v2
Package Contents In some regions, a resource CD is included with your product.
Get Started PowerLINE adapters give you an alternative way to extend your network using your existing electrical wiring. Plug two or more PowerLINE adapters into electrical outlets to create a wired network connection. Use a PowerLINE WiFi access point to add a WiFi access point to your wired network. You can add up to eight adapters to extend your network.
Meet Your Adapters Before you install your adapters, familiarize yourself with their LEDs, buttons, and ports. 1 2 3 7 8 3 6 9 1 2 4 5 5 6 4 1. Power LED 4. Ethernet port 7. WiFi LED 2. Ethernet LED 5. Factory Reset button 8. On/Off switch 3. Pick A Plug LED 6. Security button 9.
Power LED Solid green. The electrical power is on. Solid amber. The adapter is in power saving mode (PL1000v2 only). Blinking green. The adapter is in the process of setting up security. Off. The adapter is not receiving electrical power. Ethernet LED Solid. The Ethernet port is linked. Off. No Ethernet connection is detected. Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with the strongest link performance, indicated by the color displayed by the LED: Red.
Ethernet port Connect your wired devices, including computers, WiFi routers, and game consoles, to your PowerLINE network. Security button Use the Security button to create a secure PowerLINE network. On/Off switch Use the On/Off switch to turn the device on and off. WPS button Use the WPS button to automatically connect your computer or other WiFi-enabled devices that support WPS to your PowerLINE network.
Install Your Adapters ¾ To install your PowerLINE adapters: 1. Plug PowerLINE adapter model PL1000v2 into a power outlet near your router. Note: Do not plug your PowerLINE adapters into extension cords, power strips, or surge protectors. 2. Use an Ethernet cable to connect the PowerLINE adapter to a LAN port on your router. Room 2 Model PLW1000v2 Room 1 Model PL1000v2 3. On the second PowerLINE adapter model PLW1000v2, locate the WIFI SSID (WiFi network name) and WIFI KEY (WiFi password) on the label.
The SSID is similar to Netgear##_EXT or Netgear##-5G_EXT. You will need this information to connect with WiFi. 4. Plug the second PowerLINE adapter into a power outlet in the location where you want to add Internet access. 5. Wait until the Pick A Plug LEDs are lit. 6. On your computer, tablet, or smartphone, connect with WiFi to your new PowerLINE WiFi network. Congratulations. You installed your adapters and set up your network. You can customize the network and security settings later.
Do More After your PowerLINE network is installed and running, you can use WPS to connect your access point, expand your network, customize the network settings, and customize security. Use WPS to Connect to Your Network ¾ To automatically connect to the PowerLINE access point using a WPS button: 1. Press and hold the WPS button on the PowerLINE access point for two seconds and release it. The WiFi LED starts to blink. 2. Press the WPS button on your WiFi-enabled device for two seconds and release it.
Add Adapters To add adapters before you configure the network security feature, just plug them in. On your computer, tablet, or smartphone, connect with WiFi to the same PowerLINE WiFi network. ¾ To add an adapter to a PowerLINE network with security set: 1. Plug the adapter into a wall outlet where you want to add Internet access. 2.
Customize Your Network Settings The web browser setup guide helps you configure the WiFi settings of your PowerLINE adapter. ¾ To change your settings: 1. With your WiFi-enabled computer or mobile device connected to your WiFi network, open a web browser. 2. Navigate to the following address: www.mywifiext.net. 3. Follow the onscreen instructions. 4. When prompted to log in, enter the user name admin and the password.
Customize Your Network Security When you first set up your network, the setup uses a default encryption key common to all adapters. You can change this. ¾ To create a private secure network: 1. Wait until the Pick A Plug LEDs are lit. 2. Press the Security button for two seconds on one adapter, and then press the Security button on one of the other adapters for two seconds. Both buttons must be pressed within two minutes.
Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the PowerLINE devices are not plugged into an extension cord, power strip, or surge protector. Power LED is amber. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device that is connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes.
Ethernet LED is off. • • Make sure that the Ethernet cables are working and securely plugged into the devices. Press the Factory Reset button on each device for one second to return the PowerLINE adapter to its factory default settings.
Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community.netgear.com. Regulatory and Legal For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https://www.netgear.com/about/privacypolicy.
