Quick Start PowerLINE WiFi 1000 Essentials Edition Models PL1010v2 and PLW1010v2
Package Contents In some regions, a resource CD is included with your product.
Get Started PowerLINE adapters give you an alternative way to extend your network using your existing electrical wiring. Plug two or more PowerLINE adapters into electrical outlets to create a wired network connection. Use a PowerLINE WiFi access point to add a WiFi access point to your wired network. You can add up to eight adapters to extend your network.
Meet Your Adapters Before you install your adapters, familiarize yourself with their LEDs, buttons, and ports. 1 2 3 7 8 3 6 9 1 2 4 5 5 4 6 1. Power LED 4. Ethernet port 2. Ethernet LED 5. Factory Reset button 8. On/Off switch 3. Pick A Plug LED 6. Security button 4 7. WiFi LED 9.
Power LED Solid green. The electrical power is on. Solid amber. The adapter is in power saving mode (PL1010 only). Blinking green. The adapter is in the process of setting up security. Off. The adapter is not receiving electrical power. Ethernet LED Solid. The Ethernet port is linked. Off. No Ethernet connection is detected. Pick A Plug LED The Pick A Plug feature lets you pick the electrical outlet with the strongest link performance, indicated by the color displayed by the LED: Red.
Factory Reset button Press the Factory Reset button for one second, and then release it to return the PowerLINE adapter to its factory default settings. Ethernet port Connect your wired devices, including computers, WiFi routers, and game consoles, to your PowerLINE network. Security button Use the Security button to create a secure PowerLINE network. On/Off switch Use the On/Off switch to turn the device on and off.
Install Your Adapters Note: Do not plug your PowerLINE adapters into extension cords, power strips, or surge protectors.
¾ To install your adapters: 1. Plug in your new adapters. 2. Wait until the Pick A Plug LEDs are lit. 3. Use your computer, tablet, or smartphone to connect to your new PowerLINE WiFi network. The WiFi SSID and key are printed on the adapter labels. The SSID is similar to Netgear##_EXT or Netgear##5G_EXT. Congratulations. You installed your adapters and set up your network. You can customize the network and security settings later.
Do More After your PowerLINE network is installed and running, you can use WPS to connect your access point, expand your network, customize the network settings, and customize security. Use WPS to Connect to Your Network ¾ To automatically connect to the PowerLINE access point using a WPS button: 1. Press and hold the WPS button on the PowerLINE access point for two seconds and release it. The WiFi LED starts to blink. 2. Press the WPS button on your WiFi device for two seconds and release it.
Add Adapters To add adapters before you configure the security feature, just plug them in and connect the adapters to your equipment. To add adapters after you configure the security feature, do the following: ¾ To add an adapter to a PowerLINE network with security set: 1. Plug the adapter into a wall outlet where you want to add Internet access. 2.
Customize Your Network Settings The web browser setup guide helps you configure the WiFi settings of the PowerLINE. ¾ To change your settings: 1. With your computer or WiFi device connected to your WiFi network, open a web browser. 2. Navigate to the following address: www.mywifiext.net. 3. Follow the on-screen instructions. 4. When prompted to log in, enter the user name admin and the password. The initial password is the same as the WiFi key password and is printed on the adapter label.
Customize Your Network Security When you first set up your network, the setup uses a default encryption key common to all PowerLINE adapters. You can change this and create a private secure network. ¾ To create a private secure network: 1. Wait until the Pick A Plug LEDs are lit. 2. Press the Security button for two seconds on one adapter, and then press the Security button on one of the other adapters for two seconds. Both buttons must be pressed within two minutes.
Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the PowerLINE devices are not plugged into an extension cord, power strip, or surge protector. Power LED is amber. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: Pick A Plug LED is off. Pick A Plug LED is amber or red. • The Ethernet cable is unplugged. • The device that is connected through the Ethernet cable is turned off.
Ethernet LED is off. • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Factory Reset button on each device for one second to return the PowerLINE adapter to its factory default settings.
Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Trademarks © NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only. Compliance For the current EU Declaration of Conformity, visit http://kb.netgear.