User manual

Hardware Setup
20
Trek N300 Travel Router and Range Extender PR2000
WiFi Bridge Setup
Use the Ethernet ports on your Trek to connect up to two Ethernet-enabled devices
wirelessly to your existing WiFi network. Examples of Ethernet-enabled devices include an
Internet-ready TV, Blu-ray player, gaming console, and desktop or laptop computer.
NETGEAR
LAN
Internet/LAN
Reset
USB
WiFi
USB
Power
Internet
Existing
WiFi router
(Optional) Connect a USB device to the USB port
Figure 11. Two-port WiFi adapter
Plug the Ethernet cable from your Ethernet-enabled device (such as a connected TV, Blu-ray
player, or a gaming console) to one of the two Ethernet ports of the Trek and enjoy wireless
connectivity.
 To use the Trek as a WiFi bridge:
1. Connect the T
rek to a power source.
For more information, see Power Inputs on page 12.
2. T
urn on power to the Trek by moving the Internet via switch from the Power Off position to
the Wireless position.
3. Rotate the Trek’
s cover clockwise to orient the antenna.
For more information, see Antenna Orientation on page 13.
4. Connect your computer or wireless device to the T
rek's SSID, or connect your computer or
wireless device to the Trek’s LAN port with an Ethernet cable.
5. (Optional) Connect an Ethernet cable between the LAN port of the T
rek and the Ethernet
port of another device.
6. Open a web browser on your computer
, type www.routerlogin.net in the address field, and
press the Enter key.
If a login screen displays, enter admin for your user name and password for your
password.
The user name and password are case-sensitive. Then click the OK button.