User's Manual

Wireless Configuration and Security
111
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
_________________________________________________________________________
Store this information in a safe place:
• SSID
The service set identifier (SSID) identifies the wireless local area network. You can
customize it by using up
to 32 alphanumeric characters. Write your SSID on the line.
SSID:
___________________________________
The SSID in the wireless access point is the SSID you configure on
the wireless adapter
card. All wireless nodes in the same network need to be configured with the same SSID.
• WEP key
size, key format, authentication type, and passphrase
Choose the key size by circling one: 64 or 128 bits.
Choose the key format by circling one: ASCII or HEX.
Choose the authentication type by circling on
e: Open or Shared.
Passphrase:
___________________________________
Note: If yo
u select shared key, the other devices in the network will not connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless VPN firewall.
• WP
A-PSK (Pre-Shared Key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK passphrase:
________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK passphrase:
________________________________
• WPA RADIUS settings
For WPA, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared secret:
___________________________________
• WP
A2 RADIUS settings
For WPA2, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary
________________ Secondary _________________
Port:
___________________________________
Shared secret:
___________________________________
_________________________________________________________________________