User's Manual

Virtual Private Networking Using SSL Connections
280
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Complete the settings as explained in the following table:
Table 69. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to s
pecify the type of SSL VPN policy:
• Gl
obal. The new policy is global and includes all groups and users.
• Gr
oup. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see Configure Groups on page 293.
• User. Th
e new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see Configure User Accounts on page 296.
Add SSL VPN Policies
Apply
Policy to?
Select one of the following radio buttons to specify
how the policy is applied. When you select
a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
• Network
Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see Use Network Resource Objects to Simplify Policies on
page 273).
• IP Ad
dress. The policy is applied to a single IP address.
• IP Netw
ork. The policy is applied to a network address.
• A
ll Addresses. The policy is applied to all addresses.
Network
Resource
Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Defined
Resources
From the drop-down list, select a network re
source that you
have defined on the Resources screen (see Use Network
Resource Objects to Simplify Policies on page 273).
Permission From the drop-down list, select Permit or De
ny to specify
whether the policy permits or denies access.
IP Address Policy Name A descriptive name of the SSL VPN policy for identification and
mana
gement purposes.
IP Address The IPv4 or IPv6 address to which the SSL VPN policy is
ap
plied.
Port Range /
Port Number
A port (fill in the Begin field) or a range of ports (fill in the Begin
an
d End fields) to which the SSL VPN policy is applied. Ports
can be 0 through 65535. The policy is applied to all TCP and
UDP traffic that passes on those ports. Leave the fields blank to
apply the policy to all traffic.
Service From the drop-down list, select the service to which the SSL
VPN pol
icy is applied:
• VPN T
unnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. T
he policy is applied both to a VPN tunnel and to port
forwarding.