User's Manual

Monitor System Access and Performance
353
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The IPv6 Tunnel Status table shows the following fields:
• T
unnel Name. The tunnel name for the 6to4 tunnel is always sit0-WAN1 (SIT stands for
simple Internet transition); the tunnel name for an ISATAP tunnel is isatapx-LAN, in which
x is an integer.
• I
Pv6 Address. The IPv6 address of the local tunnel endpoint.
View the VPN Connection Status and L2TP Users
The Connection Status screens displays a list of IPSec VPN connections, SSL VPN
connections, and L2TP users who are currently logged in to the wireless VPN firewall.
 To view the active IPSec VPN connections:
Select VPN > Conn
ection Status. The Connection Status submenu tabs display with the
IPSec VPN Connection Status screen in view:
Figure 208.
The policy name, the endpoint’s IP address, the amount of data and number of packets
transmitted, and the state of the connection are listed in the table.
To disconnect an active connectio
n, click the Disconnect table button to the right of the
policy’s table entry.
 To view the active SSL VPN connections:
Select VPN > Conn
ection Status > SSL VPN Connection Status. The SSL VPN
Connection Status screen displays:
The active user’s user name, group, and IP address are liste
d in the table with a time stamp
indicating the time and date that the user connected.
To disconnect an active user, click the Disc
onnect table button to the right of the user’s table
entry.