User's Manual

LAN Configuration
78
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. In the upper right of the screen, select the IPv6 radio button. The LAN Setup screen displays
the IPv6 settings (see Figure 36 on p
age 72.)
3. T
o the right of the LAN Setup tab, click the RADVD option arrow. The RADVD screen for the
LAN displays. (The following figure contains some examples.)
Figure 39.
4. Enter the settings as explained in the following table:
Table 15. RADVD screen settings for the LAN
Setting Description
RADVD Status Specify the RADVD status by making a selection from the drop-down list:
• Enable. The RADVD is enabled, and the RADVD fields become available for you to
configure.
• Disab
le. The RADVD is disabled, and the RADVD fields are masked out. This is the
default setting.
Advertise Mode Specify the advertisement mode by
making a selection from the drop-down list:
• Un
solicited Multicast. The wireless VPN firewall advertises unsolicited multicast
packets at a rate that is specified by the advertisement interval.
• Un
icast only. The wireless VPN firewall responds to unicast packet requests only.
No unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.