User's Manual
Table Of Contents
- WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
- Contents
- About This Manual
- Chapter 1 Overview of the WFS709TP
- Chapter 2 Deploying a Basic WFS709TP System
- Chapter 3 Configuring Network Parameters
- Chapter 4 RF Plan
- Chapter 5 Configuring WLANS
- Chapter 6 Configuring AAA Servers
- Chapter 7 Configuring 802.1x Authentication
- Chapter 8 Configuring the Captive Portal
- Chapter 9 Configuring MAC-Based Authentication
- Chapter 10 Adding Local WFS709TPs
- Chapter 11 Configuring Redundancy
- Chapter 12 Configuring Wireless Intrusion Protection
- Chapter 13 Configuring Management Utilities
- Chapter 14 Configuring WFS709TP for Voice
- Appendix A Configuring DHCP with Vendor-Specific Options
- Appendix B Windows Client Example Configuration for 802.1x
- Appendix C Internal Captive Portal
- Appendix D Related Documents
- Index

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
B-6 Windows Client Example Configuration for 802.1x
v1.0, June 2007
• Select Enable Fast Reconnect to speed up authentication in some cases.
11. Under Select Authentication Method, click Configure to display the EAP-MSCHAPv2
Properties window. Select the option Automatically use my Windows logon name and
password, and domain if any (Figure B-6).
This option specifies that the user’s Windows logon information is used for authentication to
the wireless network. This option enables single sign-on, allowing the same logon to be used
for access to the Windows domain as well as the wireless network.
Figure B-5