User's Manual

ManualsBrandsNetgear ManualsTV Video AccessoriesNetgear Push2TV - Wireless Display Adapter PTV3000-100NAS

Installation Guide

Installation

To install and set up the Push2TV adapter with Intel WiDi:

1. Connect the Push2TV adapter to your TV and plug in the power adapter.

The Push2TV adapter LED is blinking when the adapter powers up. The LED

turns solid to indicate that the adapter is ready, but is not yet connected to your

computer.

2. Turn on your TV and select the correct TV input source for your TV.

• If you are not sure which input source to use, check the documentation that

came with your TV set.

• The Ready for Connection screen displays on your TV within 30 seconds.

If you do not see this screen, make sure that the TV input is set to the HDMI

port where the Push2TV adapter is connected and all cable connections are

firmly secured.

3. On your laptop, launch the Intel Wireless Display software. There are two ways

to launch the software

• If your laptop has a button or key, press it.

• From Windows, select Start. In the search field, type Intel Wireless Display.

Select and run the Intel Wireless Display software.

4. Use the Intel Wireless Display software to scan and find the Push2TV adapter.

The screen on the right shows that the

Intel Wireless Display software has found

the wireless adapter.

5. Double-click the detected Push2TV

adapter to connect to it.

6. If you are connecting the laptop to the

Push2TV adapter for the first time, the

Push2TV adapter displays a 4-digit

security code on the TV. Enter this 4-digit

security code into the Intel Wireless

Display software.

7. Within a few seconds, the TV screen displays your laptop screen. The LED on

the Push2TV adapter turns solid.

You are now ready to use Push2TV for Intel Wireless Display.

Adjusting Your TV Display

You can adjust the image display on the TV screen:

• To change how the image fits on the TV screen, on the Intel Wireless Display,

click the Properties button. Then click the Resize TV picture button and adjust

the picture using the plus or minus symbols.

• To remove black bars displayed on the sides of your TV screen, open the

graphics properties and change the resolution to 1280x720. Changing the

resolution might result in black bars on the laptop. To remove the black bars,

open the graphics properties and clear the preserve aspect ratio check box.

Push2TV Adapter for Wireless Display (PTV3000)

Package Contents

Push2TV Front and Back Views

USB power cable

Push2TV

adapter

Power

adapter

HDMI

LED

USB Power

Reset

Wireless

Display

Mode /

WPS

Summary of content (2 pages)

PAGE 1
Installation Guide Installation To install and set up the Push2TV adapter with Intel WiDi: 1. Connect the Push2TV adapter to your TV and plug in the power adapter. Push2TV Adapter for Wireless Display (PTV3000) Package Contents Push2TV adapter Power adapter The Push2TV adapter LED is blinking when the adapter powers up. The LED turns solid to indicate that the adapter is ready, but is not yet connected to your computer. 2. Turn on your TV and select the correct TV input source for your TV.
PAGE 2
Miracast Wireless Display Push2TV now supports Miracast™ Wireless Display. To switch between Intel WiDi and Miracast modes, press the button on the side of the Push2TV for 2 seconds. You can then launch the wireless display application on a Miracast-compatible smartphone, tablet, or laptop, and connect. FAQs 1. 2. 3. 4. 5. 6. Can I display different content on the TV while I’m using my laptop? Yes. To display different content, change the screen display setting on your computer to extend mode.