User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Router’s Network and Automatically Set Up the Internet Connection
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up a fixed IPv6 Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set Up an IPv6 6rd Tunnel Connection
- Change the MTU size
- 4. Control Access to the Internet
- 5. Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the Router’s Device Name
- Change the LAN TCP/IP settings
- Specify the IP addresses that the router assigns
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Use the WPS Wizard for WiFi connections
- Specify Basic WiFi Settings
- Change the WiFi Mbps Settings
- Change the WiFi Password or the WiFi Security
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Specify WPS settings
- Set up the router as a WiFi access point
- Set Up a Bridge for a Port Group or VLAN Tag Group
- Manage custom static routes
- Improve network connections with Universal Plug and Play
- 6. Manage Your Network
- Update the router firmware
- Change the admin Password
- Enable admin Password Recovery
- Recover the admin Password
- View Devices Currently on the Network
- Monitor Internet Traffic
- Manage the Router Configuration File
- Return the router to its factory default settings
- View the Status and Statistics of the Router
- Manage the Activity Log
- Monitor and Meter Internet Traffic
- Remote Access
- Remotely access your router using the Nighthawk app
- Disable or Enable LED Blinking or Turn Off LEDs
- 7. Share USB Storage Devices Attached to the Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router
- Map a USB device to a Windows network drive
- Back up Windows-based computers with ReadySHARE Vault
- Back up Mac computers with Time Machine
- Manage Access to a Storage Device
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Safely remove a USB storage device
- 8. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 9. Use the Router as a Media Server
- 10. Share a USB Printer
- 11. Use VPN to Access Your Network
- 12. Manage Port Forwarding and Port Triggering
- 13. Troubleshooting
- A. Supplemental Information
Install the printer driver and cable the printer
Some USB printer manufacturers (for example, HP and Lexmark) request that you do
not connect the USB cable until the installation software prompts you to do so.
To install the driver and cable the printer:
1. On each computer on your network that shares the USB printer, install the driver
software for the USB printer.
If you cannot locate the printer driver, contact the printer manufacturer.
2. Use a USB printer cable to connect the USB printer to a router USB port.
Download the ReadySHARE printer utility
The utility works on Windows-based and Mac computers.
To download the utility:
1. Visit https://www.netgear.com/home/discover/apps/readyshare.
2.
Click the PRINT - Learn how you can print wirelessly from many devices link.
3. Click the Download PC installer and get started link to download the ReadySHARE
Printer utility setup file to your Windows-based computer.
4. Follow the instructions on the page to download the ReadySHARE Printer utility.
Install the ReadySHARE printer utility
You must install the ReadySHARE Printer utility on each computer that will share the
printer. After you install it, the utility displays as NETGEAR USB Control Center on your
computer. For more information about how to use the NETGEAR USB Control Center,
visit https://www.netgear.com/support/product/ReadySHARE_USB_Printer.aspx.
To install the utility:
1.
If necessary, unzip the ReadySHARE Printer utility setup file.
2.
Double-click the ReadySHARE Printer utility setup file that you downloaded.
The InstallShield Wizard opens.
3. Follow the prompts to install the NETGEAR USB Control Center.
After the InstallShield Wizard completes the installation, the NETGEAR USB Control
Center prompts you to select a language.
User Manual131Share a USB Printer
Nighthawk AC1750 Smart WiFi Router