User Manual

Manage Your Network
145
Nighthawk X6 AC3000 Tri-Band WiFi Router
• A metric value of 1 works because the ISDN router is on the LAN.
• The Private checkbox is selected only as a precautionary security measure in case RIP
is activated.
Set Up a Static Route
 To set up a static route:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Enter http://www
.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > Static Routes.
The Static Routes screen displays.
5. Click the Add button.
6. In the Route Name field, type a name for this static route (for identification purposes only).
7. Select the Private check box if you want to limit access to the LAN only
.
If the Private check box is selected, the static route is not reported in RIP
.
8. Select the Active check box to make this route ef
fective.
9. T
ype the IP address of the final destination.
10. T
ype the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
11. T
ype the gateway IP address.
This address must be on the same LAN segment as the router.