User Manual

Specify Your Internet Settings
39
Nighthawk X6 AC3000 Tri-Band WiFi Router
Note: You must select at least one Wired Ports or Wireless check box.
You can select more than one check box.
8. Click the Apply button.
Your settings are saved.
Add VLAN Tag Groups
You can add VLAN tag groups to the bridge and assign VLAN IDs and priority values to each
VLAN tag group.
If you add a VLAN tag group to the bridge, packets sent between the device and the router’s
Internet port are not processed through the router’s network address translation (NAT) or
firewall.
 To add a VLAN tag group:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > VLAN/IPTV Setup.
The VLAN/IPTV Setup screen displays.
5. Select the Enable VLAN/IPTV Setup check box.
6. Select the By VLAN tag group radio button.
7. Click the Add button.
The Add VLAN Rule screen displays.
8. In the Name field, enter a name for the VLAN tag group.
The name can be up to 10 characters.
9. In the VLAN ID field, enter a value from 1 to 4094.
10. In the Priority field, enter a value from 0 to 7.
11. Select a Wired Ports check box or a Wireless check box: