User Manual

Access USB Devices Through the Internet
95
Nighthawk X6 AC3000 Tri-Band WiFi Router
The user name is admin. The default password is password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADV
ANCED > Advanced Setup > Dynamic DNS.
5. Select the Use a Dynamic DNS Service check box.
6. In the Service Provider list, select one of the following:
• NETGEAR
• NoIP
.com
• www
.DynDNS.org
7. Select the Ye
s radio button.
The screen adjusts and displays the Show Status, Cancel, and Apply buttons.
8. In the Host Name field, type the host name (sometimes called the domain name) for your
account.
9. For a No-IP or Dyn account, in the User Name field, type the user name for your account.
10. For a NETGEAR account at www
.no-ip, in the Email field, type the email address for your
account.
11. In the Password (6-32 characters) field, type the password for your account.
12. Click the Apply button.
Your changes are saved.
13. T
o verify that your Dynamic DNS service is enabled in the router, click the Show Status
button.
A message displays the Dynamic DNS status.