Operation Manual
6
Network Settings
The router comes ready for WiFi, Ethernet, and USB connections.You can customize the router’s network settings. We
recommend that you install the router and connect it to the Internet before you change its network settings.
This chapter includes the following sections:
• View or Change WAN Settings on page 63
• Set Up a Default DMZ Server on page 64
• Ethernet Port Aggregation on page 65
• Change the LAN TCP/IP Settings on page 67
• Change the Router’s Device Name on page 69
• Specify the IP Addresses That the Router Assigns on page 69
• Disable the DHCP Server Feature in the Router on page 71
• Manage Reserved LAN IP Addresses on page 71
• Custom Static Routes on page 73
• Set Up a Bridge for a Port Group or VLAN Tag Group on page 76
• Use the WPS Wizard for WiFi Connections on page 80
• Specify Basic WiFi Settings on page 80
• Set Up a Guest WiFi Network on page 84
• Control the WiFi Radios on page 86
• Set Up a WiFi Schedule on page 87
• Specify WPS Settings on page 88
• Use the Router as a WiFi Access Point on page 89
• Use the Router in Bridge Mode on page 91
62