NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 202-10301-01 February 2008 v1.
© 2008 by NETGEAR, Inc. All rights reserved. Product Registration, Support, and Documentation Register your product at http://www.NETGEAR.com/register. Registration is required before you can use our telephone support service. Product updates and Web support are always available by going to: http://www.netgear.com/support. Setup documentation is available on the CD, on the support website, and on the documentation website.
NOTE: This product’s firmware limits operation to only the channels allowed in a particular Region or Country. Therefore, all options described in this user's guide may not be available in your version of the product. Europe – EU Declaration of Conformity Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC).
Nederlands [Dutch] Hierbij verklaart NETGEAR Inc. dat het toestel Radiolan in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, NETGEAR Inc., jiddikjara li dan Radiolan jikkonforma mal-htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, NETGEAR Inc.
FCC Declaration Of Conformity We NETGEAR, Inc., 4500 Great America Parkway, Santa Clara, CA 95054, declare under our sole responsibility that the model WNDR3300 RangeMax Dual Band Wireless-N Router WNDR3300 complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation.
Product and Publication Details Model Number: WNDR3300 Publication Date: February 2008 Product Family: Wireless Router Product Name: RangeMax Dual Band Wireless-N Router WNDR3300 Home or Business Product: Home Language: English Publication Part Number: 202-10301-01 vi v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Contents About This Manual Conventions, Formats, and Scope ....................................................................................xi How to Use This Manual ..................................................................................................xii How to Print This Manual .................................................................................................xii Revision History ........................
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Changing the Administrator Password .........................................................................2-19 Backing Up Your Configuration .....................................................................................2-20 Understanding Your Firewall .........................................................................................2-21 Chapter 3 Restricting Access From Your Network Content Filtering Overview ..........
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual How Port Forwarding Differs from Port Triggering ...................................................5-6 Configuring Port Forwarding to Local Servers ................................................................5-6 Adding a Custom Service .........................................................................................5-7 Editing or Deleting a Port Forwarding Entry .............................................................
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Make sure that the wireless settings in the computer and router match exactly. 7-2 Make sure that the network settings of the computer are correct. ....................7-2 Check the Test light to verify correct router operation. .....................................7-2 Troubleshooting Basic Functions ....................................................................................7-2 The Power light is not on or is blinking. ........
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual About This Manual The user manual provides information for configuring the features of the NETGEAR® RangeMax Dual Band Wireless-N Router WNDR3300 beyond initial configuration settings. Initial configuration instructions can be found in the NETGEAR Wireless Router Setup Manual. You should have basic to intermediate computer and Internet skills.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Danger: This is a safety warning. Failure to take heed of this notice might result in personal injury or death. • Scope.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual – Printing from PDF. Your computer must have the free Adobe Acrobat Reader installed for you to view and print PDF files. The Acrobat Reader is available on the Adobe website at http://www.adobe.com. – Printing a PDF chapter. Use the PDF of This Chapter link at the top left of any page. – • Click the PDF of This Chapter link at the top left of any page in the chapter you want to print.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual xiv v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 1 Configuring Basic Connectivity This chapter describes the settings for your Internet connection and your wireless local area network (LAN) connection. When you perform the initial configuration of your wireless router using the Resource CD as described in the NETGEAR Wireless Router Setup Manual, these settings are specified automatically for you.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Logging In to Your Wireless Router When the wireless router is connected to your network, you can access and configure the router using your browser. To access the Web Configuration Manager: 1. Connect to the wireless router by typing http://www.routerlogin.net or the router’s LAN IP address (default is 192.168.1.1) in the address field of your browser, and then press Enter.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual The Checking for Firmware Updates screen displays unless you previously cleared the Check for Updated Firmware Upon Log-in check box. Figure 1-2 If the router discovers a newer version of the software, you are asked if you want to upgrade to the new software (see “Upgrading the Router Software” on page 6-9 for details). If no new firmware is available, the following message displays. Figure 1-3 3.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Figure 1-4 Note: If the Check for New Version Upon Log-in check box is selected, the home page is the Router Upgrade screen. Otherwise, it is the Basic Settings screen. If the wireless router is connected to the Internet, you can click the Knowledge Base link or the Documentation link under Web Support to view support information or the documentation for the wireless router.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Configuring Your Internet Connection Using the Smart Setup Wizard You can manually configure your Internet connection using the Basic Settings screen, or you can allow the Smart Setup Wizard to determine your Internet Service Provider (ISP) configuration. The Smart Setup Wizard searches your Internet connection for servers and protocols to determine your ISP configuration.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual ISP does not require login Figure 1-5 – Account Name (might also be called Host Name). The account name is provided to the ISP during a DHCP request from your router. In most cases, this setting is not required, but some ISPs require it for access to ISP services such as mail or news servers. – Domain Name.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • – If your ISP has assigned you a permanent, fixed (static) IP address for your computer, select Use Static IP Address. Enter the IP address that your ISP assigned. Also, enter the subnet mask and the gateway IP address. The gateway is the ISP’s router to which your router will connect. Domain Name Server (DNS) Address.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual If a login is required by your ISP, the following settings appear in the Basic Settings screen: ISP does require login Figure 1-6 – Internet Service Provider. This drop-down list contains a few ISPs that need special protocols for connection. The list includes: • PPTP (Point to Point Tunneling Protocol), used primarily in Austrian DSL services • Telstra Bigpond, an Australian residential cable modem service.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Other, which selects PPPoE (Point to Point Protocol over Ethernet), the protocol used by most DSL services worldwide Figure 1-7 Note: Not all ISPs are listed here. The ones on this list have special requirements. – Login and Password. This is the user name and password provided by your ISP. This name and password are used to log in to the ISP server. – Service Name.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual – Connection Mode. This drop-down list (shown in Figure 1-6 on page 1-8) specifies when the router will connect to and disconnect from the Internet. The list includes: • Always On. The router logs in to the Internet immediately after booting and never disconnects. • Dial on Demand. The router logs in only when outgoing traffic is present and logs out after the idle time-out. • Manually Connect.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 2 Safeguarding Your Network The RangeMax Dual Band Wireless-N Router WNDR3300 provides highly effective security features, which are covered in detail in this chapter.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual NETGEAR recommends using WEP with Shared Key authentication. Do not run an unsecured wireless network unless it is your intention to provide free Internet access for the public. WEP connections can take slightly longer to establish. Also, WEP, WPA-PSK, and WPA2-PSK encryption can consume more battery power on a notebook computer, and can cause significant performance degradation with a slow computer.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table 2-1. Wireless Security Options Security Type Description None. No wireless security. Recommended only for troubleshooting wireless connectivity. Do not run an unsecured wireless network unless it is your intention to provide free Internet access for the public. WEP. Wired Equivalent Privacy. Wired Equivalent Privacy (WEP) data encryption provides moderate data security.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table 2-2. Other Features That Enhance Security (continued) Security Type Description Restrict access based on MAC address. You can restrict access to only trusted computers so that unknown computers cannot wirelessly connect to the WNDR3300 router. MAC address filtering adds an obstacle against unwanted access to your network by the general public, but the data broadcast over the wireless link is fully exposed.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • If WEP Authentication is used, circle one: Open System, Shared Key, or Auto. Note: If you select Shared Key, the other devices in the network will not connect unless they are also set to Shared Key and are configured with the correct key. – WEP Encryption Key Size. Choose one: 64-bit or 128-bit. Again, the encryption key size must be the same for the wireless adapters and the wireless router. – Data Encryption (WEP) Keys.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Viewing Basic Wireless Settings To configure the wireless security settings of your router: 1. Log in to the router as described in “Logging In to Your Wireless Router” on page 1-2. 2. Select Wireless Settings under Setup in the main menu. Figure 2-2 The available settings in this screen are: • Name (11N SSID) or Name (11G SSID). These are the names of the 11N and 11G wireless networks.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Region. This field identifies the region where the WNDR3300 router can be used. It might not be legal to operate the wireless features of the wireless router in a region other than one of those identified in this field. Note: The region selection feature might not be available in all countries. • Mode. This field determines which 802.11 data communications protocol is used.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • 11N Channel or 11G Channel. These fields determine which operating frequency is used for the 11N or 11G wireless networks. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless network. For more information about the wireless channel frequencies, click the link to the online document “Wireless Networking Basics” in Appendix B. • Security Options.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To configure WEP data encryption: Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. You must then either configure your wireless adapter to match the wireless router WEP settings or access the wireless router from a wired computer to make any further changes. Not all wireless adapter configuration utilities support passphrase key generation. 1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 4. You can manually or automatically program the four data encryption keys. These values must be identical on all computers and access points in your network. • Automatic. In the Passphrase field, enter a word or group of printable characters, and click Generate. The passphrase is case-sensitive. For example, NETGEAR is not the same as nETgear. The four key fields are automatically populated with key values. • Manual.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Select one of the WPA-PSK or WPA2-PSK options for the security type. The third option (WPA-PSK [TKIP] + WP2-PSK [AES]) is the most flexible, since it allows clients using either WPA-PSK or WPA2-PSK. 3. In the Passphrase field, enter a word or group of 8–63 printable characters. The passphrase is case-sensitive. Figure 2-4 4. Click Apply to save your settings.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Select Wireless Settings under Advanced in the main menu. Figure 2-5 The available settings in this screen are: • Enable Wireless Router Radio. If you disable the wireless router radio, wireless devices cannot connect to the WNDR3300 router. If you will not be using your wireless network for a period of time, you can clear this check box and disable all wireless connectivity. • Enable SSID Broadcast.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual encryption. The WNDR3300 router and any connected clients share the same network names (SSIDs), for both 11N and 11G. Note that WPS is not a new security feature—it makes existing security features easier to configure. Note: Using WPS security might disconnect devices you already have connected to your router.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual The WNDR3300 router’s dome lights cease blinking when one of these conditions occurs: • The router and the client establish a wireless connection. • The 2-minute window period expires for establishing a WPS connection. If the connection is not established, no WPS security settings will be configured in the WNDR3300 router. PIN Entry To enable a wireless client to join a network using a PIN: 1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Select Wireless Settings under Advanced in the main menu. Figure 2-8 These options are available under WPS Settings: • Router’s PIN. The PIN is displayed so that you can use it to configure the router through WPS (Wi-Fi Protected Setup). It is also displayed on the router’s label. • Disable Router’s PIN.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Adding Additional WPS-Enabled Clients To add an additional wireless client device that is WPS enabled: Note: Your wireless settings do not change when you add an additional WPS-enabled client unless you have cleared the Keep Existing Wireless Settings check box (in the Wireless Settings screen).
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Restricting Wireless Access by MAC Address When a Wireless Card Access List is configured and enabled, the router checks the MAC address of any wireless device attempting a connection and allows only connections to computers identified on the trusted computers list. The Wireless Card Access List displays a list of wireless computers that you allow to connect to the router based on their MAC addresses.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 3. Click Add to add a wireless device to the wireless access control list. The Wireless Card Access Setup screen opens and displays a list of currently active wireless cards and their Ethernet MAC addresses. Figure 2-10 4.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 7. Select the Turn Access Control On check box. Note: When configuring the router from a wireless computer whose MAC address is not in the Trusted PC list, if you select Turn Access Control On, you lose your wireless connection when you click Apply. You must then access the wireless router from a wired computer or from a wireless computer that is on the access control list to make any further changes. 8.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To change the administrator password: 1. On the main menu, under Maintenance, select Set Password to display the Set Password screen. Figure 2-11 2. To change the password, first enter the old password, then enter the new password twice. 3. Click Apply. Backing Up Your Configuration The configuration settings of the WNDR3300 router are stored within the router in a configuration file.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Understanding Your Firewall Your RangeMax Dual Band Wireless-N Router WNDR3300 contains a true firewall to protect your network from attacks and intrusions. A firewall is a device that protects one network from another while allowing communication between the two. Using a process called Stateful Packet Inspection, the firewall analyzes all inbound and outbound traffic to determine whether or not it will be allowed to pass through.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2-22 Safeguarding Your Network v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 3 Restricting Access From Your Network This chapter describes how to use the content filtering and reporting features of the RangeMax Dual Band Wireless-N Router WNDR3300 to protect your network. You can find these features by selecting the items under Content Filtering in the main menu of the browser interface.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Here are some keyword application examples: • If the keyword XXX is specified, the URL www.zzzyyqq.com/xxx.html is blocked. • If the keyword .com is specified, only websites with other domain suffixes (such as .edu, .org, or .gov) can be viewed. To block access to Internet sites: 1. Select Block Sites under Content Filtering in the main menu. The Block Sites screen displays. Figure 3-1 2.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Delete a keyword or domain name by selecting it from the list and clicking Delete Keyword. 4. You can specify one trusted user, which is a computer that is exempt from blocking and logging. Specify a trusted user by entering that computer’s IP address in the Trusted IP Address fields. Since the trusted user is identified by IP address, you should configure that computer with a fixed IP address. 5.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Enable service blocking by selecting either Per Schedule or Always, and then click Apply. To block by schedule, be sure to specify a time period in the Schedule screen. For information about scheduling, see “Scheduling Blocking” on page 3-5. 3. Specify a service for blocking by clicking Add. The Block Services Setup screen displays. Figure 3-3 4.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Enter the starting port and ending port numbers. If the application uses a single port number, enter that number in both fields. • If you know that the application uses either TCP or UDP, select the appropriate protocol. If you are not sure, select Both.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual a. Days to Block. Select days on which you want to apply blocking by selecting the appropriate check boxes. Select Every Day to select the check boxes for all days. Click Apply. b. Time of Day to Block. Select a start and end time in 24-hour format. Select All Day for 24-hour blocking. Click Apply. Be sure to select your time zone in the E-mail screen as described in “Setting the Time” on page 3-9. 3. Click Apply to save your settings.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table 3-1 describes the log entries. Table 3-1. Log Entry Descriptions Field Description Date and time The date and time the log entry was recorded. Source IP The IP address of the initiating device for this log entry. Target address The name or IP address of the website or newsgroup visited or to which access was attempted. Action Whether the access was blocked or allowed. To refresh the log screen, click the Refresh button.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Figure 3-6 2. To receive e-mail logs and alerts from the router, select the Turn E-mail Notification On check box. a. Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com) in the Your Outgoing Mail Server field. You might be able to find this information in the configuration screen of your e-mail program. If you leave this field blank, log and alert messages will not be sent by e-mail. b.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 4. You can specify that logs are automatically sent by e-mail with these options: • Send alert immediately. Select this check box for immediate notification of attempted access to a blocked site or service. • Send Logs According to this Schedule. Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full. – Day. Specifies which day of the week to send the log. Relevant when the log is sent weekly or daily. – Time.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 3-10 Restricting Access From Your Network v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 4 Customizing Your Network Settings This chapter describes how to configure advanced networking features of the RangeMax Dual Band Wireless-N Router WNDR3300, including LAN, WAN, and routing settings.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual . Figure 4-1 Configuring a Device Name The device name is a user-friendly name for the router. This name is shown in the Network on Windows Vista and the Network Explorer on all Windows systems. The Device Name field cannot be blank. Configuring LAN TCP/IP Setup Parameters The router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • IP Subnet Mask. The LAN subnet mask of the router. Combined with the IP address, the IP subnet mask allows a device to know which other addresses are local to it, and which must be reached through a gateway or router. • RIP Direction. RIP allows a router to exchange routing information with other routers. The RIP Direction selection controls how the router sends and receives RIP packets. Both is the default.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual The router delivers the following parameters to any LAN device that requests DHCP: • An IP Address from the range you have defined • Subnet Mask • Gateway IP Address (the router’s LAN IP address) • Primary DNS Server (if you entered a primary DNS address in the Basic Settings screen; otherwise, the router’s LAN IP address) • Secondary DNS Server (if you entered a secondary DNS address in the Basic Settings screen) To use anot
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To edit or delete a reserved address entry: 1. Select the radio button next to the reserved address you want to edit or delete. 2. Click Edit or Delete. Using a Dynamic DNS Service If your Internet Service Provider (ISP) gave you a permanently assigned IP address, you can register a domain name and have that name linked with your IP address by public Domain Name Servers (DNS).
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual From the main menu of the browser interface, under Advanced, select Dynamic DNS to display the Dynamic DNS screen. Figure 4-2 To configure Dynamic DNS: 1. Register for an account with one of the Dynamic DNS service providers whose names appear in the Service Provider list. For example, for DynDNS.org, select www.dyndns.org. 2. Select the Use a Dynamic DNS Service check box. 3. Select the name of your Dynamic DNS service provider. 4.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Configuring the WAN Setup Options The WAN Setup options let you configure a DMZ (demilitarized zone) server, change the Maximum Transmit Unit (MTU) size, and enable the wireless router to respond to a ping on the WAN (Internet) port. From the main menu of the browser interface, under Advanced, click WAN Setup to view the WAN Setup screen.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual them, but there are other applications that might not function well. In some cases, one local computer can run the application correctly if that computer’s IP address is entered as the default DMZ server. Warning: DMZ servers pose a security risk. A computer designated as the default DMZ server loses much of the protection of the firewall and is exposed to exploits from the Internet.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Configuring NAT Filtering Network Address Translation (NAT) determines how the router processes inbound traffic. Secured NAT provides a secured firewall to protect the computers on the LAN from attacks from the Internet, but might prevent some Internet games, point-to-point applications, or multimedia applications from functioning. Open NAT provides a much less secured firewall, but allows almost all Internet applications to function.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.1.100. • A Metric value of 1 will work since the ISDN router is on the LAN. • Private is selected only as a precautionary security measure in case RIP is activated. Select Static Routes under Advanced in the main menu. The Static Routes screen displays. Figure 4-4 To add or edit a static route: 1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 5. Type the destination IP address of the final destination. 6. Type the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. 7. Type the gateway IP address, which must be a router on the same LAN segment as the WNDR3300 router. 8. Type a number between 1 and 15 as the metric value. This represents the number of routers between your network and the destination.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 4-12 Customizing Your Network Settings v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 5 Fine-Tuning Your Network This chapter describes how to modify the configuration of the RangeMax Dual Band Wireless-N Router WNDR3300 to allow specific applications to access the Internet or to be accessed from the Internet, and how to make adjustments to enhance your network’s performance.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual How Your Computer Communicates with a Remote Computer through Your Router When a computer on your network needs to access a computer on the Internet, your computer sends your router a message containing source and destination address and process information.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 4. The Web server at www.example.com composes a return message with the requested Web page data. The return message contains the following address and port information: • The source address is the IP address of www.example.com. • The source port number is 80, the standard port number for a Web server process. • The destination address is the public IP address of your router. • The destination port number is 33333.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual “When you initiate a session with destination port 6667, you must also allow incoming traffic on port 113 to reach the originating computer.” Using steps similar to the preceding example, the following sequence shows the effects of the port triggering rule that you have defined: 1. You open an IRC client program, beginning a chat session on your computer. 2.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual How Port Forwarding Changes the Communication Process In both of the preceding examples, your computer initiates an application session with a server computer on the Internet. However, you might need to allow a client computer on the Internet to initiate a connection to a server computer on your network. Usually, your router ignores any inbound traffic that is not a response to your own outbound traffic.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual How Port Forwarding Differs from Port Triggering The following points summarize the differences between port forwarding and port triggering: • Port triggering can be used by any computer on your network, although only one computer can use it at a time. • Port forwarding is configured for a single computer on your network. • Port triggering does not need to know the computer’s IP address in advance.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To configure port forwarding to a local server: 1. Select Port Forwarding/Port Triggering under Advanced in the main menu. The Forwarding/Port Triggering screen displays. Figure 5-1 2. From the Service Name list, select the service or game that you will host on your network. If the service does not appear in the list, see the following section, “Adding a Custom Service.” 3.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Click Add Custom Service. The Ports - Custom Services screen displays. Figure 5-2 3. In the Service Name field, type a descriptive name. 4. In the Service Type list, select the protocol. If you are unsure, select TCP/UDP. 5. In the Starting Port field, type the beginning port number. • If the application uses only a single port, type the same port number in the Ending Port field.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To make a local Web server public: 1. Assign your Web server either a fixed IP address or a dynamic IP address using DHCP address reservation, as explained in “Using Address Reservation” on page 4-4. In this example, your router always gives your Web server an IP address of 192.168.1.33. 2. Configure the Port Forwarding screen to forward the HTTP service to the local address of your Web server at 192.168.1.33.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To configure port triggering, you need to know which inbound ports the application needs. Also, you need to know the outbound port number that will trigger the opening of the inbound ports. You can usually determine this information by contacting the publisher of the application or user groups or newsgroups. To set up port triggering: 1. Select Port Forwarding/Port Triggering under Advanced in the main menu.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 4. In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls the inactivity timer for the designated inbound ports. The inbound ports close when the inactivity timer expires. This is required because the router cannot be sure when the application has terminated. 5. Click Add Service. Figure 5-4 6. In the Service Name field, type a descriptive service name. 7.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Using Universal Plug and Play Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers, to access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other registered UPnP devices on the network.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Advertisement Period. The advertisement period is how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of additional network traffic. Longer durations might compromise the freshness of the device status but can significantly reduce network traffic.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • • • • Choose placement carefully. For best results, place your router: – Near the center of the area in which your computers will operate. – In an elevated location such as a high shelf where the wirelessly connected computers have line-of-sight access (even if through walls). – Avoid obstacles to wireless signals.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual From the main menu of the browser interface, under Advanced, select QoS Setup. The QoS Setup screen displays: Figure 5-6 Using WMM QoS for Wireless Multimedia Applications The WNDR3300 router supports Wi-Fi Multimedia Quality of Service (WMM QoS) to prioritize wireless voice and video traffic over the wireless link.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual WMM QoS is enabled by default. You can disable it in the QoS Setup screen, shown in Figure 5-6 on page 5-15, by clearing the Enable WMM check box and clicking Apply.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual a. If you select to add a new entry, the screen expands as shown: Figure 5-8 b. In the QoS Policy for field, enter a descriptive name for the new application or game. c. Select the packet type, either TCP, UDP, or both (TCP/UDP), and specify the port number or range of port numbers used by the application or game. 5.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 3. From the Priority Category list, select Ethernet LAN Port. The QoS - Priority Rules screen changes: Figure 5-9 4. From the LAN port list, select the LAN port that will have a QoS policy. 5. From the Priority drop-down list, select the priority that this port’s traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest. 6.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 3. From the Priority Category list, select MAC Address. The QoS - Priority Rules screen changes: Figure 5-10 4. If the device to be prioritized appears in the MAC Device List, select it. The information from the MAC Device List will be used to populate the policy name, MAC Address, and Device Name fields. If the device does not appear in the MAC Device List, click Refresh.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Click Delete to remove the QoS policy. • Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to change the policy settings. 3. Click Apply in the QoS Setup screen to save your changes. Changing the MTU The Maximum Transmission Unit (MTU) is the largest data packet a network device transmits.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are willing to experiment, you can gradually reduce the MTU from the maximum value of 1500 until the problem goes away. Table 5-1 describes common MTU sizes and applications. Table 5-1. Common MTU Sizes MTU Application 1500 The largest Ethernet packet size and the default value.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Next, consider the throughput of your network devices. Where possible, make the heaviest-traffic connections using higher-speed technologies, with no lower-speed bottlenecks in the path. RangeMax Dual Band Wireless-N Router WNDR3300 Figure 5-11 Figure 5-11 shows a sample network using multiple networking technologies.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Overview of Home and Small Office Networking Technologies Common connection types and their speed and security considerations are: • Broadband Internet. Your Internet connection speed is determined by your modem type, such as ADSL or cable modem, as well as the connection speed of the sites to which you connect, and general Internet traffic.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Wired Ethernet. As gigabit-speed Ethernet ports (10/100/1000 Mbps) become common on newer computers, wired Ethernet remains a good choice for speed, economy, and security. Gigabit Ethernet can extend up to 100 meters with twisted-pair wiring of CAT-5e or better. A wired connection is not susceptible to interference, and eavesdropping would require a physical connection to your network. Note: Actual data throughput will vary.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 6 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your RangeMax Dual Band Wireless-N Router WNDR3300. You can access these features by selecting the items under Maintenance in the main menu of the browser interface.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Figure 6-1 Table 6-1 describes the router status fields. Table 6-1. Wireless Router Status Fields Field Description Account Name The host name assigned to the router. Firmware Version The version of the current software installed in the router. This will change if you upgrade your router. Internet Port These settings apply to the Internet (WAN) port of the router: 6-2 Using Network Monitoring Tools v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table 6-1. Wireless Router Status Fields (continued) Field Description MAC Address The Media Access Control address. This is the unique physical address being used by the Internet (WAN) port of the router. IP Address The IP address being used by the Internet (WAN) port of the router. If no address is shown, or is 0.0.0.0, the router cannot connect to the Internet.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table 6-1. Wireless Router Status Fields (continued) Field Description Wireless Port These settings apply to the wireless port of the router: Name (11N SSID) The 11N wireless network name (SSID) being used by the wireless port of the router. The default is NETGEAR-DualBand-N. Name (11G SSID) The 11G wireless network name (SSID) being used by the wireless port of the router. The default is NETGEAR-2.4-G.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Click Connection Status to display the connection status. Figure 6-2 Table 6-2 describes the connection status settings. Table 6-2. Connection Status Settings Item Description IP Address The IP address that is assigned to the router. Subnet Mask The subnet mask that is assigned to the router. Default Gateway The IP address for the default gateway that the router communicates with.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 3. Click Show Statistics to display router usage statistics. Figure 6-3 Table 6-3 describes the router statistics. Table 6-3. Router Statistics Item Description System Up Time The time elapsed since the router was last restarted. Port The statistics for the WAN (Internet) and LAN (Ethernet) ports. For each port, the screen displays: Status The link status of the port.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Viewing a List of Attached Devices The Attached Devices table contains a table of all IP devices that the router has discovered on the local network. From the main menu of the browser interface, under Maintenance, select Attached Devices to view the table. Figure 6-4 For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual From the main menu of the browser interface, under Maintenance, select Backup Settings. Figure 6-5 The following sections describe the three available options. Backing Up and Restoring the Configuration The Restore and Backup options in the Settings Backup screen let you save and retrieve a file containing your router’s configuration settings. To save your settings, click Back Up.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Erasing the Configuration Under some circumstances (for example, if you move the router to a different network or if you have forgotten the password), you might want to erase the configuration and restore the factory default settings. After an erase, the router’s user name is admin, the password is password, the LAN IP address is 192.168.1.1 (or www.routerlogin.net), and the router’s DHCP server is enabled.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual The Checking for Firmware Updates screen appears at login unless you clear the Check for Updated Firmware Upon Log-in check box. Figure 6-6 A screen is also provided for upgrading the router. From the main menu of the browser interface, under Maintenance, select Router Upgrade to display the Router Upgrade screen. Figure 6-7 From this screen, you can check for new software versions by clicking the Check button.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Tip: Before upgrading the router software, use the router Settings Backup screen to save your configuration settings. A router upgrade might cause the router settings to revert to the factory defaults. If this happens, after completing the upgrade, you can restore your settings from the backup.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Upgrading Manually to New Router Software To manually select, download, and install new software to your router: 1. Under Maintenance on the main menu, select Router Status. Note the version number of your router firmware. 2. Go to the WNDR3300 support page on the NETGEAR website at http://www.netgear.com/support. 3. Check the most recent firmware version offered against the firmware version shown in the Router Status screen. 4.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Enabling Remote Management Access Using the remote management feature, you can allow a user on the Internet to configure, upgrade, and check the status of your WNDR3300 router. From the main menu of the browser interface, under Advanced, select Remote Management. Figure 6-9 Note: Be sure to change the router’s default configuration password to a very secure password.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 2. Under Allow Remote Access By, specify what external IP addresses will be allowed to access the router’s remote management. Note: For enhanced security, restrict access to as few external IP addresses as practical. • To allow access from any IP address on the Internet, select Everyone. • To allow access from a range of IP addresses on the Internet, select IP Address Range.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Chapter 7 Troubleshooting This chapter provides information about troubleshooting your RangeMax Dual Band Wireless-N Router WNDR3300. After each problem description, instructions are provided to help you diagnose and solve the problem. As a first step, review the Quick Tips. Tip: NETGEAR provides helpful articles, documentation, and the latest software updates at http://www.netgear.com/support.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 5. Turn on the computers. Make sure that the Ethernet cables are securely plugged in. • The Internet status light on the wireless router is on if the Ethernet cable connecting the wireless router and the modem is plugged in securely and the modem and wireless router are turned on. • For each powered-on computer connected to the wireless router by an Ethernet cable, the corresponding numbered router LAN port light is on.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual a. The Power light is solidly on. b. The Internet light is on. c. A numbered Ethernet port light is on for any local port that is connected to a computer. This indicates that a link has been established to the connected device. If any of the above conditions does not occur, see the appropriate following section. The Power light is not on or is blinking.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Make sure that the Ethernet cable connections are secure at the router and at the modem or computer. • Make sure that power is turned on to the connected modem or computer. • Be sure that you are using the correct cable: When connecting the router’s Internet port to a cable or DSL modem, use the cable that was supplied with the cable or DSL modem.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Make sure that you are using the correct login information. The factory default login name is admin, and the password is password. Make sure that Caps Lock is off when entering this information.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Your ISP allows only one Ethernet MAC address to connect to Internet and might check for your computer’s MAC address. In this case, do one of the following: – Inform your ISP that you have bought a new network device, and ask them to use the router’s MAC address. – Configure your router to spoof your computer’s MAC address.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Testing the LAN Path to Your Router You can ping the router from your computer to verify that the LAN path to your router is set up correctly. To ping the router from a running Windows PC: 1. From the Windows toolbar, click the Start button, and then select Run. 2. In the field provided, type ping followed by the IP address of the router, as in this example: ping www.routerlogin.net 3. Click OK.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Testing the Path from Your Computer to a Remote Device After verifying that the LAN path works correctly, test the path from your computer to a remote device. 1. From the Windows toolbar, click the Start button, and then select Run. 2. In the Windows Run window, type: ping -n 10 where is the IP address of a remote device such as your ISP’s DNS server.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Date shown is January 1, 2000. Cause: The router has not yet successfully reached a Network Time Server. Check that your Internet access is configured correctly. If you have just completed configuring the router, wait at least 5 minutes, and check the date and time again. • Time is off by one hour. Cause: The router does not adjust for daylight savings time.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual • Is your router set to a wireless standard that is not supported by your wireless card? Check the Mode setting, as described in “Viewing and Configuring Basic ISP Settings” on page 1-5.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 1. Select Wireless Settings under Setup in the main menu of the WNDR3300 router. Figure 7-1 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR. Note: The SSID is case-sensitive; NETGEAR is not the same as nETgear.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual This field determines which operating frequency is used. It should not be necessary to change the wireless channel unless you notice interference problems with another nearby wireless router or access point. Select a channel that is not being used by any other wireless networks within several hundred feet of your router.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 12. Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you configured in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the router.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual 7-14 Troubleshooting v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Appendix A Technical Specifications Default Configuration Settings This appendix provides factory default settings and technical specifications for the RangeMax Dual Band Wireless-N Router WNDR3300. Table A-1. WNDR3300 Router Default Configuration Settings Feature Default Setting Router Login Router Login URL http://www.routerlogin.net or http://www.routerlogin.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table A-1. WNDR3300 Router Default Configuration Settings (continued) Feature Default Setting Wireless Wireless Communication Enabled SSID Name • 11N SSID: NETGEAR-DualBand-N • 11G SSID: NETGEAR-2.4-G Security Disabled Broadcast SSID Enabled Transmission Speed Autoa Country/Region United States in the US, otherwise varies by region RF Channel 6 until region selected Operating Mode • Mode 1. 802.11n 2.4G mode • Mode 2.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table A-1. WNDR3300 Router Default Configuration Settings (continued) Feature Default Setting Power Adapter North America 120V, 60 Hz, input United Kingdom, Australia 240V, 50 Hz, input Europe 230V, 50 Hz, input Japan 100V, 50/60 Hz, input All regions (output) 12V DC @ 1.5A output, 18W maximum Physical Specifications Dimensions 1.1" x 6.89" x 4.68" 28 x 175 x 119 mm Weight 1.2 lbs. 0.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Table A-1. WNDR3300 Router Default Configuration Settings (continued) Feature Default Setting Interface Specifications LAN 10BASE-T or 100BASE-Tx, RJ-45 WAN 10BASE-T or 100BASE-Tx, RJ-45 Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. Actual throughput will vary.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual To restore the factory default configuration settings: 1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings button, located on the rear panel of the router, for about 20 seconds. 2. Release the restore factory settings button, and wait for the router to reboot. The factory default settings are restored so that you can access the router from your Web browser using the factory defaults.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual A-6 Technical Specifications v1.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link TCP/IP Networking Basics http://documentation.netgear.com/reference/enu/tcpip/index.htm Wireless Networking Basics http://documentation.netgear.com/reference/enu/wireless/index.htm Preparing Your Network http://documentation.netgear.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual B-2 Related Documents v1.
Index A blocking access 3-1 inbound traffic 5-1 access blocking 3-1 remote 6-13 restricting by MAC address 2-17 viewing logs 3-6 bold text xi broadband Internet 5-23 broadcast status 6-4 access control turning off 7-12 turning on 2-19 C account name 1-6, 6-2 cables, checking 7-2 adding client devices 2-15 priority rules 5-16 WPS client 2-13 channel, wireless port 6-4 client devices, adding 2-15 configuration file 6-7 backing up 6-8 erasing 6-9 administrator password, changing 2-19 advanced wirele
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual D data packets, fragmented 5-20 date and time, troubleshooting 7-8 daylight savings time 3-9, 7-9 Ethernet cables, checking 7-2 Ethernet light, troubleshooting and 7-3 Ethernet MAC address.
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Internet port, status 6-2 Internet services, blocking access 3-3 interval, poll 6-6 IP addresses autogenerated 7-4 blocking access by 3-5 current 6-3 dynamic 4-5 dynamic or static 1-6 LAN 4-2 reserved 4-4 IP subnet mask 4-3, 6-3 ISP settings 1-5 italic text xi K M MAC addresses attached devices 6-7 current 6-3 entering 1-7 QoS for 5-18 restricting access by 2-17 troubleshooting 7-8 mail server, outgoing 3-8 managing router remotely 6-
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual path, testing 7-8 Resource CD 1-1 physical specifications A-3 restarting network 7-1 PIN, router 2-14, 2-15 restoring configuration 6-8 default factory settings 6-9, 7-13, A-4 ping 4-8, 7-6 placing router 5-14 poll interval 6-6 port filtering 3-3 port forwarding 5-5, 5-6 port numbers 3-3 port status 6-6 port triggering configuring 5-9 overview 5-3 port forwarding, compared to 5-6 power adapter, default settings A-3 restricting ac
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual status, router, viewing 6-1 router status 6-1 streaming video and audio 5-24 subnet mask 4-3, 6-3 W system up time 6-6 WAN IP address, troubleshooting 7-5 WAN setup 4-7 T Web Configuration Interface, troubleshooting 7-4 TCP/IP network, troubleshooting 7-6 Web Configuration Manager 1-2 technical specifications A-1 WEP encryption 2-3, 2-8 Telstra Bigpond 1-8 Wireless Card Access List 2-17 Test light, troubleshooting and 7-2
NETGEAR RangeMax™ Dual Band Wireless-N Router WNDR3300 Reference Manual Index-6 v1.
