Use and Care Manual

hops, which should be fine for most home networks. If you notice that some devices
are not being updated or reached correctly, it might be necessary to increase this
value.
8. Click the Apply button.
The UPnP Portmap Table displays the IP address of each UPnP device that is accessing
the router and which ports (internal and external) that device opened. The UPnP
Portmap Table also displays what type of port is open and whether that port is still
active for each IP address.
9.
To refresh the information in the UPnP Portmap Table, click the Refresh button.
Enable or disable daisy-chain topology
Daisy-chain topology allows your Orbi satellite to connect to other Orbi satellites. This
feature only applies if you own three or more Orbi devices. If you disable this feature,
your Orbi satellites can connect only to your Orbi router. This feature is enabled by
default.
Note: Enabling or disabling this feature causes all your Orbi devices to reboot.
To enable or disable fast roaming:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5.
To enable or disable daisy-chain topology, do one of the following:
•
To enable daisy-chain topology, select the Enable Daisy-Chain Topology check
box.
•
To disable daisy-chain topology, clear the Enable Daisy-Chain Topology check
box.
User Manual58Optimize Performance
Orbi WiFi System