Use and Care Manual

Manage Your Network
104
Orbi WiFi System
4. Select ADVANCED > Advanced Setup > Traffic Meter.
5. Select the Enable Traffic Meter check box.
6. T
o control the volume of Internet traffic, use either the traffic volume control feature or the
connection time control feature:
• Select the T
raffic volume control by radio button and then select one of the
following options:
- No Limit. No restriction is applied when the traf
fic limit is reached.
- Download only.
The restriction is applied to incoming traffic only.
- Both Directions.
The restriction is applied to both incoming and outgoing traffic.
• Select the Connection time control radio button and enter the allowed hours in the
Monthly limit field.
7. If your ISP charges for extra data volume when you make a new connection, enter the extra
data volume in MB in the Round up data volume for each connection by field.
8. In the
Traffic Counter section, set the traffic counter to begin at a specific time and date.
To start the traffic counter immediately, click the Restart Counter Now button.
9. If you want the router to issue a warning message before the monthly limit of Mbytes or
hours is reached, in the
Traffic Control section, enter a numeric value.
By default, the value is 0 and no warning message is issued.
10. T
o stop the Internet connection when the limit is attained, select the Disconnect and
disable the Internet connection check box.
11. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
12. T
o update the Internet Traffic Statistics section, click the Refresh button.
13. T
o display more information about the data traffic on your router and to change the poll
interval, click the Internet Traffic Status button.