Quick Start Manual

8
6. Select the factory default option from the boot menu.
• If you have a 4-bay storage system, do the following:
a Press and release the Reset button to scroll through the
boot menu options.
b When only the LAN 1 and Power LEDs are lit, press and
hold the Reset button for three seconds.
• If you have a 12-bay storage system, do the following:
a Press and release the Reset button to scroll through the
boot menu options.
b When only the UI LED is lit, press and hold the Reset
button for three seconds.
The system initiates a short disk test that takes 2 to 5 minutes.
Then a 10-minute time-out period begins. After 10 minutes, the
factory default process starts.
7. (Optional) Press the Reset button to skip the 10-minute time-out
period and begin the factory default process immediately.
The system returns to its factory default settings and reformats all
installed disks for use with ReadyNAS OS 6. When the factory default
process is complete, the reformatted disks are ready to use with your
system.