User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
DescriptionItem
IPv6 settings
From the menu, select how IPv6 is configured:
•
Automatically/DHCP. The ReadyNAS is configured with an IPv6 address through stateless
autoconfiguration without the requirement of a DHCPv6 server on your network. The
ReadyNAS must be connected to the Internet for stateless auto configuration to function.
•
Static. You must enter the IPv6 address and prefix length for the ReadyNAS and the router
through which the ReadyNAS is connected to the network.
•
Disable. Disables IPv6 networking.
Configure
Manual configuration only.Enter the IPv6 address for the router through which
the ReadyNAS connects to your network. The default
setting is undefined.
Router
Enter the link local address range.IPv6
Link-Local
Enter the IPv6 address for the ReadyNAS.IPv6 Address
Enter the prefix length for the ReadyNAS. The default
prefix length is 64.
Prefix Length
Add a DNS server.+
Select a DNS server and click to remove that server.-
9. Click the Apply button.
Your settings are saved.
10. Configure the switch or router to which the ReadyNAS is attached to support the
bonded adapter.
Change the Teaming Mode
To change the teaming mode of a bonded adapter:
1. Log in to your ReadyNAS.
2. Select Network > Bonds.
The page updates showing the bonded interfaces.
3. Click the gear icon for the bonded adapter.
4. Click the Settings button in the pop-up menu.
The bond settings pop-up window opens.
5. Click the Mode tab.
Software Manual201System Settings
ReadyNAS OS 6.10