User Manual

The Create VLAN window opens with Name and VLAN ID fields. The name field is
grayed out.
Note: There can be no more than one VLAN ID on a network interface.
5.
Type a number in the VLAN ID field.
The ID value is a number from 1 to 4094.
The name field is automatically populated with the VLAN name. The format is
ethn.VLAN ID where n is the Ethernet interface number and VLAN ID is the number
that you entered.
6. Click the Add button.
The VLAN interface is created with Ethernet interface settings matching the Ethernet
interface that you selected in Step 3.
You can change the Ethernet settings. For information about changing the settings, see
Configure the Ethernet Interfaces on page 193.
Add Global Proxy Settings
Your ReadyNAS system automatically configures some proxy settings. For example,
ReadyCLOUD access provides a set of default proxy requirements. However, you can
also manually configure proxy settings.
To add global proxy settings:
1. Log in to your ReadyNAS Admin Page.
2. Select Network.
The page updates to show network options.
3. Select Advanced.
The page updates to show the advanced network options.
4.
Click the add (plus) button in the Proxy section of the page.
The Proxy Settings window opens.
5. Enter the proxy settings.
Note: User name and password are required only if user account authentication is
required by the proxy server.
6. (Optional) Click the Test button
The test attempts to connect to a NETGEAR server using the proxy settings. A window
opens reporting success or failure of the connection. You can click the Ignore button
to close the window.
7. Click the Apply button.
Software Manual205System Settings
ReadyNAS OS 6.10