User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
Note: Because you cleared the Enable check box, you must manually start the
recovery job. For information about manually starting a job, see Manually Start a
Backup or Recovery Job on page 285.
Select the Finish button.
The New Backup Job: Schedule window closes and the recovery job is added to the
Jobs list.
For information about recovery sources, destinations, and protocols, see Recovery
Concepts on page 263.
Modify a Backup or Recovery Job
After you create a backup or recovery job, you can change the job name, schedule, and
other options.
Change the Name of a Job
To change the name of a backup or recovery job:
1. Log in to the ReadyNAS.
2. Select Backup.
The page updates showing the backup jobs.
3. Mouse over the backup or recovery job from the Jobs list and click the displayed
gear icon.
4. In the pop-up menu, click the Settings button.
A pop-up window opens with the General tab selected.
5. In the Name field, enter a job name.
6. Click the Apply button.
Software Manual274Backup and Recovery
ReadyNAS OS 6.10