User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
job, the key is automatically exchanged. If you cannot log in, you must download and
exchange the public key for the managing device so that the other device can validate
the connection.
You do not need to exchange the key if the source and destination are the same device.
1. Log in to the ReadyNAS device on which you will create the ReadyDR job.
2. Select Backup.
3.
If ReadyDR is not already on, move the On-Off slider to ON.
4. Click the Access List button.
The Access List window opens.
5.
Click the Download key file button.
Your browsersopen or save file window opens.
6.
Save the file.
The file name is public_readydr_key-system_name.
7. Log in to your other ReadyNAS device.
8. Select Backup.
9.
If ReadyDR is not already on, move the on-off slider to ON.
10. Click the Access List button.
The Access List window opens.
11. Click the Import Public Key button.
The Import Public Key window opens.
12.
Browse to the previously saved public key file, and click the Upload button.
Software Manual291Backup and Recovery
ReadyNAS OS 6.10