User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
6. Click the Network Access tab.
7. Click one of the file-sharing protocol buttons. The page adjusts to display the access
properties for the selected protocol.
8. Click the Hosts tab on the left side of the pop-up window.
Note: If the host access list is empty, any host is allowed to access the share. If you
add at least one host to the list, access to the share is restricted to hosts on the list
only.
9. Click the + button.
The Add Host pop-up window opens.
10. Enter the host IP address in the IP address field.
11. Click the Add button.
The host is added to the host access list.
Note: For SMB, the access rights for each host depend on the access rights of the
user.
12. (Optional for Rsync) Select the default access rights for users on the listed hosts:
•
Read Only. The users on the listed hosts are permitted only to read files on the
share.
•
Read/Write. The users on the listed hosts are permitted to read, edit, create,
and delete files on the share.
Software Manual76Shares
ReadyNAS OS 6.10