Datasheet

ManualsBrandsNetgear ManualsPower Supply UnitsRPS5412-100EUS

Rev. A

Specifications

RPS Power Supply Series™ is a unique and a highly

reliable power supply series. It is used as a redundant

power supply for NETGEAR® RPS capable PoE,

10/100 Ethernet, and Gigabit Ethernet switches. The

power supplies in this series are tested and verified by

NETGEAR®.

The RPS Power Series™ is designed for Universal AC

to DC power supply applications. Because of this

feature these power supplies can be used anywhere in

the world.

The Model RPS5412 is a 1U rack mountable RPS

(Redundant power supply). The RPS has an ON/OFF

switch, and an associating DC power LED.

The Redundant Power that you can rely on

Electrical

Output Voltage –52V DC +12V DC

Output Ripple Typical 200mV Typical 120mV

Output Current Typical 5.77A max. Typical 9A max.

Output Power* 300W 100W

Input Voltage Universal 90VAC to 264VAC input

Input Frequency 47Hz to 63Hz

Input Current 5 Ampere maximum

Typical Safety Ratings for Internal Power Module

Designed in full

compliance with

UL60950

CSA 22.2 No. 234

EN60950

EMI EN55022 “Class A”

EMS EN61000-4-2,-3,-4,-5,-6,-8,-11

Harmonics EN61000-3-2 Class D

Environmental

Overload Protection Auto-recovery

Functional Temperature 0 to 70 °C

Storage Temperature -20 to 85 °C

Over voltage Type Latch off

Efficiency 80-90% Typical

RoHS YES

Dimensions 1U (1.75” H x 19” W x 12.12” D)

Weight Approx. 11.55 lb = 5239 g = 184.80 oz

Redundant Power Supply System for NETGEAR® RPS Capable Switches

Model No. RPS5412

Data Sheet

www.optimal-power.com

RoHS

2002/95/EC

OPTIMAL POWER

Summary of content (3 pages)

PAGE 1
OPTIMAL POWER Model No. RPS5412 Data Sheet ® Redundant Power Supply System for NETGEAR® RPS Capable Switches The Redundant Power that you can rely on RPS Power Supply Series™ is a unique and a highly reliable power supply series. It is used as a redundant power supply for NETGEAR® RPS capable PoE, 10/100 Ethernet, and Gigabit Ethernet switches. The power supplies in this series are tested and verified by NETGEAR®. The RPS Power Series™ is designed for Universal AC to DC power supply applications.
PAGE 2
Compatible NETGEAR® Switch Model Number Table Optimal Power® RPS Models RPS5412 RPS5412 RPS5412* RPS5412* RPS5412 RPS5412 RPS5412 NETGEAR® Switch Model GSM7224-200 GSM7248-200 GSM7228PS GSM7252PS GSM7328S-200 GSM7352S-200 GSM7328FS Optimal Power® DC Cable RPSC5412 RPSC5412 RPSC5412 RPSC5412 RPSC5412 RPSC5412 RPSC5412 * NOTE The Model RPS5412 only provides up to 300W for POE application. If POE devices connected to the switch system need more than 300W, then this device is not recommended.
PAGE 3
LIABILITY DO NOT OPERATE OR SERVICE THE RPS5412 MODEL WITHOUT READING THIS ENTIRE DOCUMENT FIRST Optimal Power Supplies LLC is not responsible for any kind of damages sustained through the use of this or any other Optimal Power Supplies LLC products. It is entirely the customer’s responsibility to take all the necessary precautionary measures when installing this unit.