User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
5. Click the Expand link.
6. Enter the following settings:
•
New Size. Specify the new size of the LUN. The maximum size that you can
allocate to a thick LUN is stated above the New Size field.
•
Unit. Select the unit of measurement from the drop-down list (MB, GB, or TB).
7. Click the Apply button.
The new LUN size takes effect.
8. Click the OK button.
Your settings are saved and the pop-up window closes.
9. (Optional) Add the LUN to the LUN group to which it belonged before the expansion.
See Create a LUN Group on page 104.
User access to the LUN is restored.
Delete a LUN
WARNING: Deleting a LUN permanently removes the data within that LUN.
To delete a LUN from a volume:
1. Log in to your ReadyNAS.
2. Select iSCSI.
The screen updates showing the iSCSI LUNs and groups.
Software Manual102LUNs
ReadyNAS OS 6.10