User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
To enable ReadyNAS Replicate:
1. Log in to your ReadyNAS.
2. Select Cloud.
3. Set the ReadyNAS Replicate On-Off slider so that the slider shows the On position.
The ReadyNAS Replicate window opens.
4. Enter your ReadyNAS Replicate login credentials and click the Register button, or
if you do not have ReadyNAS Replicate credentials, go to
www.replicate.readynas.com.
Your system is registered with ReadyNAS Replicate and the ReadyNAS Replicate
feature is enabled on your system.
5. Repeat this process on each ReadyNAS OS 6 system that you want to use with
ReadyNAS Replicate.
Software Manual180Use Cloud Services
ReadyNAS OS 6.10