User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
To configure AFP, Rsync, or SSH:
1. Log in to your ReadyNAS.
2. Select System > Settings > Services.
3. Click the protocol button (AFP, Rsync, or SSH).
•
If the indicator is green, the protocol is enabled.
•
If the indicator is gray, the protocol is disabled.
WARNING: If you enable SSH root access, NETGEAR might deny you technical
support. If you do enable SSH root access, the root password is identical to the
administrator password that you configured.
Note: After you enable SSH, you must configure individual user accounts to permit
use of SSH. For information about how to enable the use of SSH by a user, see
Configure a User Account to Use SSH on page 217.
Configure FTP
To configure FTP:
1. Log in to your ReadyNAS.
2. Select System > Settings > Services.
Software Manual211System Settings
ReadyNAS OS 6.10