User Manual

(Continued)
DescriptionItem
Enter the IP address of the remote UPS.AddressRemote UPS only
For a remote UPS that is attached to a Linux server that is
running NUT, enter the user name used to access the remote
UPS. For a remote UPS that is attached to a ReadyNAS, enter
monuser. This user name is required for the ReadyNAS to
access the remote UPS. Do not enter another user name.
User
For a remote UPS that is attached to a Linux server that is
running NUT, enter the password used to access the remote
UPS. For a remote UPS that is attached to a ReadyNAS, enter
pass. This password is required for the ReadyNAS to access
the remote UPS. Do not enter another password.
Password
6. Click the Add button.
The UPS is added to the UPS section.
Monitor a UPS
To monitor the status of a UPS:
1. Log in to your ReadyNAS.
2. Select System > Power.
The window updates showing the power sections.
When the ReadyNAS system detects the UPS device, it displays the following
information about the device in the UPS list:
DescriptionItem
The status of the UPS:
•
On line power
•
On battery
•
Low battery
•
On battery and Low battery
•
On line power and Low battery
•
Unknown
Status
The name of the UPS. For a remote UPS, the name
is always UPS.
Name
Software Manual234System Power
ReadyNAS OS 6.10