User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
(Continued)
DescriptionItem
The description that you gave the UPS.Description
The detected serial number of the UPS.Serial
The detected model of the UPS.Model
The detected manufacturer of the UPS.MFR
The IP address of the UPS.Address
Edit a UPS
To edit a UPS in the UPS list:
1. Log in to your ReadyNAS.
2. Select System > Power.
The window updates showing the power sections.
3. In the UPS section, select the UPS.
4. Click the gear icon to the right of the UPS list.
5. In the UPS list, highlight the UPS that you want to modify.
The fields on this pop-up window depend on the type of UPS.
6. Modify the settings as required. You cannot change the Type setting.
7. Click the Apply button.
Your settings are saved. The modified UPS settings are displayed in the UPS list.
Remove a UPS
Software Manual235System Power
ReadyNAS OS 6.10