User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
9. From the menu, select the information that you want to view:
•
All. The default group Everyone and all groups that you configured on the local
database or that were downloaded from the Active Directory server are displayed.
This is the default setting.
•
Users. Only the individual users that you configured on the local database or
that were downloaded from the Active Directory server are displayed.
•
Groups. Only the groups that you configured on the local database or that were
downloaded from the Active Directory server are displayed.
For information about using the local database or an Active Directory, see User and
Group Management Modes on page 138.
Tip: To search for a particular user or group, use the search field next to the Search
icon ( ). To update the user and group information, click the Refresh icon ( ).
10.
For each individual user ( ) and group ( ) that you want to allow to access the
share, select one of the following check boxes:
•
Read Only. The selected user or group is permitted only to read files on the
share.
•
Read/Write. The selected user or group is permitted to read, edit, create, and
delete files on the share.
Note: If the ReadyNAS uses the local database, you can select the default group
Everyone to grant all users and groups read-only or read/write access.
11. (Optional for SMB and AFP) Allow anonymous access to the share. If the ReadyNAS
uses the local database and you grant the default group Everyone access, you can
select the Allow anonymous access check box to allow anonymous access to the
share. In this situation, users are not required to provide their account credentials
when accessing the share.
12. (Optional for AFP) Configure the ReadyNAS system to override the macOS settings.
a. Click the Advanced tab.
The page adjusts to show the AFP advanced settings.
b.
Select the Automatic Permissions check box and set the permissions for folder
and file creation rights for
13. Click the Apply button.
14. Click OK button.
Your settings are saved and the pop-up window closes.
Software Manual74Shares
ReadyNAS OS 6.10