User Manual
Table Of Contents
- Contents
- 1. Getting Started
- Start Using Your ReadyNAS System
- Additional Documentation
- Supported ReadyNAS Systems
- Supported Operating Systems
- Supported Browsers
- Diskless Systems
- Basic Installation
- Upgrade Pre-6.2 ReadyNAS Firmware for Use With ReadyCLOUD
- Discover and Set Up Your ReadyNAS Using ReadyCLOUD
- Local Setup Wizard
- Admin Page
- Access the Local Admin Page
- Register Your System
- Five Levels of Protection
- The ReadyNAS Community
- Safe Mode
- 2. Volume Configuration
- Basic Volume and RAID Concepts
- ReadyTIER, Tiers, Data, and Metadata
- Manage Volumes
- Change RAID Mode
- View the Status of a Volume
- Configure the Checksum Function
- Format Disks
- Create and Encrypt a Volume
- Delete a Volume
- Name a USB Drive
- Expand Storage Capacity
- Add Protection to a Volume
- Add Protection to a Flex-RAID Volume
- Add a Group to a Flex-RAID Volume
- Delete a RAID Group
- Use the Volume Management Wizard to Create a Volume
- Add a Tier to a Volume
- Enable or Disable Quotas on Volumes
- Maintain Volumes
- 3. Shares
- 4. LUNs
- 5. Snapshots
- 6. Users and Groups
- 7. Use Cloud Services
- 8. System Settings
- 9. System Power
- 10. Install and Manage Apps
- 11. System Monitoring
- 12. System Maintenance
- 13. Backup and Recovery
4. Click the gear icon for the folder.
5. Click the Settings button in the pop-up menu.
The share settings display in a pop-up window.
6. In the folder settings pop-up window, click the Network Access tab.
7. Click the RSYNC file-sharing protocol button.
The page adjusts.
8. Click the Security tab on the left side of the pop-up window.
9. Select the Enable Password Protection check box.
10. Click the + button and create at least one Rsync user account and password.
Note: Rsync credentials are completely separate from your ReadyNAS storage
system’s user accounts.
11. Click the Apply button.
12. Click the OK button.
Your settings are saved and the pop-up window closes.
Manage Access to Remote Shares
The SMB protocol allows you to access remote shares on other network-attached devices
and treat them as if they resided locally on your ReadyNAS system.
To enable access to a remote share:
1. Log in to the ReadyNAS.
2. Select Shares > Shares.
A list of shares and LUNs on each volume displays.
3. Select the share that you want to configure.
Software Manual78Shares
ReadyNAS OS 6.10