Installation Guide

5
3. Connect the power adapter to the power cord.
4. Connect the power adapter to the back of the system and plug the
power cord into a wall outlet or power strip.
5. Use an Ethernet cable to connect an Ethernet port on the storage
system to your network.
6. If necessary, press the Power button to turn on the system.
7. Wait for the Power LED to turn solid blue or for the status display
screen to display the system’s IP address.
8. Visit readycloud.netgear.com on a computer that uses the same local
area network (LAN) and Internet connection as your ReadyNAS
system.