User Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Router’s Network and Automatically Set Up the Internet Connection
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Specify IPv6 Internet connections
- Requirements for entering IPv6 addresses
- Use Auto Detect for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up a fixed IPv6 Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Use Auto Config for an IPv6 Internet connection
- Set up an IPv6 6rd tunnel connection
- Manage the MTU size
- 4. Control Access to the Internet
- Manage NETGEAR Armor
- Activate Armor using the Nighthawk app
- View or change your NETGEAR Armor settings using the Nighthawk app
- View or change your NETGEAR Armor settings from the Armor portal
- Sign in to NETGEAR Armor from the router web interface and start your subscription
- Access the NETGEAR Armor portal from the router web interface
- Disable or Reenable NETGEAR Armor from the router web interface
- Enable Circle with Disney
- Enable access control to allow or block access to the Internet
- Manage network access control lists
- Use keywords to block Internet sites
- Delete keywords from the blocked list
- Prevent blocking on a trusted computer
- Block services from the Internet
- Schedule when to block Internet sites and services
- Set up security event email notifications
- Manage NETGEAR Armor
- 5. Optimize Performance
- 6. Manage Network Settings
- View or change the WAN settings
- Set up a default DMZ server
- Change the LAN TCP/IP settings
- Change the router’s device name
- Specify the IP addresses that the router assigns
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Set up the router as a WiFi access point
- Set up the router in bridge mode
- Return the router to router mode
- Set up a bridge for a port group or VLAN tag group
- Manage custom static routes
- 7. Manage the WiFi Network Settings
- Use the WPS Wizard for WiFi connections
- Specify basic WiFi settings
- Change the WiFi password or the WiFi security
- Set up WPA/WPA2 enterprise WiFi security
- Set up WEP legacy WiFi security
- Change the WiFi Mbps settings
- Change the transmission power of the WiFi radios
- Set up a guest WiFi network
- Control the WiFi radios
- Set up a WiFi schedule
- Manage WPS settings
- Enable or disable implicit beamforming
- Enable or disable airtime fairness
- Enable or disable MU-MIMO
- Manage advanced WiFi settings
- 8. Manage Your Router
- Update the router firmware
- Change the admin password
- Enable admin password recovery
- Recover the admin password
- Manage the router configuration file
- View information about the router and the Internet and WiFi settings
- Display the statistics of the Internet port
- Check the Internet connection status
- View and manage logs of router activity
- View devices currently on the network
- Monitor, meter, and control Internet traffic
- Set your time zone
- Change the NTP server
- Disable LED blinking or turn off LEDs
- Return the router to its factory default settings
- 9. Share USB Storage Devices Attached to the Router
- USB device requirements
- Connect a USB storage device to the router
- Access a storage device connected to the router
- Back up Windows-based computers with ReadySHARE Vault
- Enable FTP access within your network
- View network folders on a storage device
- Add a network folder on a USB storage device
- Edit a network folder on a USB storage device
- Approve a USB storage device
- Remotely access a USB device using ReadyCLOUD
- Safely remove a USB storage device
- 10. Use VPN to Access Your Network
- Set up a VPN connection
- Manage Dynamic DNS for VPN connections
- Enable and configure OpenVPN on the router
- Install OpenVPN software
- Install the OpenVPN client utility and VPN configuration files on a Windows-based computer
- Install the OpenVPN client utility and VPN configuration files on a Mac
- Install the OpenVPN client utility and VPN configuration files on an iOS device
- Install the OpenVPN client utility and VPN configuration files on an Android device
- LAN requirements for VPN connections
- Use a VPN tunnel on a Windows-based computer
- Use VPN to access your Internet service at home
- 11. Manage Port Forwarding and Port Triggering Traffic Rules
- 12. Troubleshooting
- A. Supplemental Information
The QR code label is on the top panel.
Your Preset Wireless Settings
WiFi Network Name (SSID):
Network Key (Password):
Your Preset Wireless Settings
WiFi Network Name (SSID):
Network Key (Password):
Figure 4. QR code label location
Position your router
The router lets you access your network anywhere within the operating range of your
WiFi network. However, the operating distance or range of your WiFi connection can
vary significantly depending on the physical placement of your router.
In addition, position your router according to the following guidelines:
•
Place your router near the center of the area where your computers and other devices
operate, and within line of sight to your WiFi devices.
•
Make sure that the router is within reach of an AC power outlet and near Ethernet
cables for wired computers.
•
Place the router in an elevated location, minimizing the number walls and ceilings
between the router and your other devices.
•
Place the router away from electrical devices such as these:
-
Ceiling fans
- Home security systems
- Microwaves
- Computers
-
Base of a cordless phone
- 2.4 GHz or 5 GHz cordless phones
User Manual14Hardware Setup
Nighthawk AC2300 Cybersecurity WiFi Router Model RS400