Reference Manual for the NETGEAR Storage Central SC101 NETGEAR, Inc.
© 2005 by NETGEAR, Inc. All rights reserved. FullManual. Technical Support Please register to obtain technical support. Please retain your proof of purchase and warranty information. To register your product, get product support or obtain product information and product documentation, go to http://www.netgear.com. If you do not have access to the World Wide Web, you can register your product by filling out the registration card and mailing it to NETGEAR customer service.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
iv v1.
Contents Chapter 1 About This Manual Audience, Scope, Conventions, and Formats ................................................................1-1 How to Use This Manual ................................................................................................1-3 How to Print this Manual .................................................................................................1-4 Chapter 2 Introduction About the Storage Central SC101 ............................................................
Chapter 4 Management Storage Application Scenarios ........................................................................................4-1 Expanding PC Disk Storage .....................................................................................4-2 Easy Access to Photos, Music, or Videos ................................................................4-3 Protecting Against Data Loss ...................................................................................
Chapter 1 About This Manual This chapter describes the intended audience, scope, conventions, and formats of this manual. Audience, Scope, Conventions, and Formats This reference manual assumes that the reader has basic to intermediate computer and Internet skills. However, basic computer network, Internet, firewall, and VPN technologies tutorial information is provided in the Appendices and on the Netgear website. This guide uses the following typographical conventions: Table 1-1.
Reference Manual for the NETGEAR Storage Central SC101 Danger: This is a safety warning. Failure to take heed of this notice may result in personal injury or death. This manual is written for the Storage Central according to these specifications: Table 1-2. Manual Scope Product Version Storage Central SC101 Manual Publication Date September 2005 Note: Product updates are available on the NETGEAR, Inc. Web site at http://kbserver.netgear.com/products/SC101.asp. 1-2 v1.
Reference Manual for the NETGEAR Storage Central SC101 How to Use This Manual The HTML version of this manual includes the following: • Buttons, at a time and , for browsing forwards or backwards through the manual one page • A button that displays the table of contents and an button. Double-click on a link in the table of contents or index to navigate directly to where the topic is described in the manual. • A product model. • Links to PDF versions of the full manual and individual chapters.
Reference Manual for the NETGEAR Storage Central SC101 How to Print this Manual To print this manual you can choose one of the following several options, according to your needs. • Printing a Page in the HTML View. Each page in the HTML version of the manual is dedicated to a major topic. Use the Print button on the browser toolbar to print the page contents. • Printing a Chapter. Use the PDF of This Chapter link at the top left of any page.
Chapter 2 Introduction For quick installation and setup, please see the SC101 Storage Central Installation Guide. This manual describes in detail how to set up the SC101 and provides you with further reference information. This chapter introduces the NETGEAR Storage Central SC101. Minimal prerequisites for installation are presented in “System Requirements” on page 2-2.
Reference Manual for the NETGEAR Storage Central SC101 System Requirements Before installing the SC101, make sure your network meets these requirements: • A 100-240 V, 50-60 HZ AC input, with 12V DC 5A output power source • At least one Windows XP, 2000, or 2003 computer with the TCP/IP protocol installed and a CD-ROM drive • An Ethernet network using the TCP/IP protocols and having a DHCP server like those found in home routers.
Reference Manual for the NETGEAR Storage Central SC101 Front Description The Storage Central SC101 front functions are described below. Use a coin or screwdriver to open the spring loaded front cover lock by turning it clockwise. Front Cover Lock Figure 2-1 The following table describes the front cover information: ITEM DESCRIPTION Hard Disk Status Light (Red) Disk Activity Indicators Off No activity or turned off. Red On Disk activity.
Reference Manual for the NETGEAR Storage Central SC101 ITEM DESCRIPTION Ethernet Status Light (Yellow) Ethernet LAN Link Activity Indicator Off No power or no activity On Powered on but no data traffic Blink Data traffic Back Description The Storage Central SC101 front and rear hardware functions are described on the back label illustrated below.
Reference Manual for the NETGEAR Storage Central SC101 • – Pushed once, it reboots the SC101 – Pushed and held for eight or more seconds, it restores the password for administrator to “password”, which is the default setting; and detaches all drives. Use the SC101 Ethernet RJ-45 port to connect to an Ethernet LAN. 2-5 v1.
Reference Manual for the NETGEAR Storage Central SC101 2-6 v1.
Chapter 3 Installation and Basic Configuration This chapter describes how to install your Storage Central SC101 and set up basic connectivity on your Local Area Network (LAN). Installation Overview Estimated Completion Time: 30 minutes. These instructions will guide you through these three steps: 1. First, Install a hard disk, and connect the Storage Central SC101 to your network. 2. Next, Install the Storage Central SC101 software. 3. Now, Allocate SC101 disk space for each PC that will use the SC101.
Reference Manual for the NETGEAR Storage Central SC101 Unpack the unit, Ethernet cable, power adapter, and the NETGEAR CD. The CD contains driver software, a setup wizard, and links to online resources. Familiarize yourself with the SC101 unit. Notice the rear of the SC101 has information about the ports and the front status lights. Note: When you set up the unit, stand it on its feet, and be sure it has ample ventilation. Avoid putting the unit in a location where it could be knocked over easily.
Reference Manual for the NETGEAR Storage Central SC101 Install the Hard Disk Warning: Be sure to unplug the power cord from the SC101 before adding or removing the disks. Failure to observe this precaution could render your disks useless. Follow the steps below to install an IDE hard disk drive into you SC101. 1. Remove the cover. a. Use a coin or screwdriver to open the spring loaded cover lock by turning it clockwise. b. Remove the cover. Figure 3-4 2. Insert the hard disk. a.
Reference Manual for the NETGEAR Storage Central SC101 3. Connect the hard disk cables. Power Cable Data Cable Key Data Cable Figure 3-6 a. Align and insert the hard disk power cable into the D-shaped power socket. b. Align the key of the hard disk data cable with the slot on the data cable socket and insert the cable. Neatly tuck the cables in so that they will not interfere with attaching the cover. 4. Attach the front cover. a. Align the cover with the unit. b.
Reference Manual for the NETGEAR Storage Central SC101 Connect the SC101 to Your Network 1. Connect the provided Ethernet cable to your network and to the back of the SC101. Be sure your network is running. DHCP must be available in the network. DHCP is usually enabled on home networks by default. 2. Plug in the power adapter to a power source and connect the other end to the SC101. View the front panel to verify that the green power light is on and that the yellow network light is on.
Reference Manual for the NETGEAR Storage Central SC101 2. Click Install Software. Figure 3-9 3. Click Check for Updates and proceed according to the prompts. The software checks to see if the SC101 is on your network. For more information about software upgrades, see “Understanding the Product Update Features” on page 4-5. If Windows logo certification warnings appear, click Continue Anyhow to proceed. 4. Choose the setup type that you want, Complete (recommended) or Custom.
Reference Manual for the NETGEAR Storage Central SC101 Now, Create Disk Space for PCs That Will Use the SC101 1. Click the Storage Central Manager software icon on your desktop. 2. Choose the Wizard configuration mode. The Wizard configuration mode is explained in detail in Chapter 4, “Management” , and in the help described in “Using the Status Bar and Context Sensitive Help” on page 3-8. Figure 3-11 3.
Reference Manual for the NETGEAR Storage Central SC101 4. Verify that you can copy files to and from your new SC101 drive. Note: The SC101 formats hard disks differently than a PC does. Do not swap hard disks between a SC101 and a PC: the data will be unreadable. 5. Repeat these steps for each PC that will use the SC101 drives. Refer to the manual for instructions on how to use advanced features such as mirroring.
Reference Manual for the NETGEAR Storage Central SC101 Troubleshooting Tips Here are some tips for correcting simple problems you may have. For additional help, see Chapter 7, “Troubleshooting” . Always restart your network in this sequence: 1. Turn off and unplug the modem, turn off the router, shut off the SC101, and shut down the computers. 2. Plug in and turn on the cable or DSL modem. Wait about two minutes. 3. Turn on the router. Wait about one minute. 4. Turn on the SC101. 5. Turn on the computers.
Reference Manual for the NETGEAR Storage Central SC101 3-10 v1.
Chapter 4 Management There are a variety of ways you can use you Storage Central SC101storage. This chapter describes storage application scenarios; and explains how to manage your SC101, security considerations, and file backup requirements. Storage Application Scenarios You can share resources on the Storage Central SC101 for a wide variety of purposes.
Reference Manual for the NETGEAR Storage Central SC101 Expanding PC Disk Storage The SC101 easily allows you to expand the amount of disk space your PCs can access. Typically, enabling access to additional disk space for your PCs includes these elements: • One or more SC101 units each with one or two hard disks installed and the SC101 software installed on each PC that will access the Storage Central unit. • Drive space created on the SC101 for your PCs to access.
Reference Manual for the NETGEAR Storage Central SC101 Easy Access to Photos, Music, or Videos The SC101 allows you to create a central storage location for photos and multimedia. Figure 4-2 Typically, sharing photos, music, or videos, includes these elements: • One or more SC101 units each with one or two hard disks installed and the SC101 software installed on each PC that will access the SC101 units. • The SC101 drive you allocate needs to be set to Shared.
Reference Manual for the NETGEAR Storage Central SC101 – If your network does include wireless access, then use a password to restrict access and implement appropriate wireless security. Now, PCs with access to the drive can save or play media photos, music, or movies from it. Protecting Against Data Loss You can use theStorage Central SC101 disks to protect against data loss that can happen when a hard disk fails or from other problems like virus attacks or accidental deletion.
Reference Manual for the NETGEAR Storage Central SC101 Understanding the Product Update Features Note: The product update features require Internet access. No information is transferred to NETGEAR when you use the product update features. The Storage Central SC101includes product update features that make it easy for you to take advantage of ongoing enhancements that NETGEAR provides. Both the product CD and the Storage Central Manager let you easily update your SC101.
Reference Manual for the NETGEAR Storage Central SC101 4-6 v1.
Chapter 5 Configuration There are a variety of ways you can configure your Storage Central SC101.This chapter describes how to use the wizards to configure your SC101. Understanding the Wizard Setup Mode and the Advanced Configuration Mode You can choose to configure the Storage Central SC101 with Wizard Setup mode or Advanced Configuration mode. The table below explains both of these options.
Reference Manual for the NETGEAR Storage Central SC101 Using the Wizard Setup Mode The Storage Central Manager software provides Wizard Setup and Advanced Configuration modes. To use the Wizard Setup mode, follow the instructions below. 1. Click the icon, and both configuration mode options are displayed as shown to the right. Figure 5-1 2. Select Wizard Setup and click Next. The Wizard Option screen opens.
Reference Manual for the NETGEAR Storage Central SC101 Creating a New Drive You need to create at least one drive for each computer that will store data on a hard disk in the Storage Central SC101. 1. From the Wizard Option screen, select Create a New Drive, and click Next. 2. Select which physical hard disk in the Storage Central SC101 to store data for this PC. 3. Enter the name and size for the new drive that you are creating. 4.
Reference Manual for the NETGEAR Storage Central SC101 7. Verify that you can copy files to and from your new SC101 drive. Note: The SC101 formats hard disks differently than a PC does. Do not swap hard disks between a SC101 and a PC: the data will be unreadable. 8. Repeat these steps for each computer that will use the SC101 drives. Managing an Existing Drive After you have created drives for each computer that will use the Storage Central SC101 you may need to manage the drives.
Reference Manual for the NETGEAR Storage Central SC101 To manage a drive, follow the steps below: 1. From the Wizard Option screen, select Manage an Existing Drive, and click Next. 2. Choose the drive that you want to manage and click Next. Figure 5-5 3. Choose the task that you want to complete, and follow the wizard prompts. Figure 5-6 5-5 v1.
Reference Manual for the NETGEAR Storage Central SC101 Attaching Drives When you first create a shared drive it is only available to the PC that you were using when you created it. If you want to use the shared drive from other PCs, then you must run the Storage Central Manager software on that PC and attach the drive. You only need to attach the drive once. From that point onward, the PC will be able to use the shared drive. To attach a drive, follow the instructions below. 1.
Chapter 6 Advanced Configuration There are a variety of ways you can configure your Storage Central SC101. For information about using the Wizard Setup Configuration Options, see “Using the Wizard Setup Mode” on page 5-2. This chapter describes how to use Advanced Configuration to set up your SC101. You can use Advanced Configuration to complete the following tasks: • Status: Use the Check Central Storage Status button to check the status of the SC101.
Reference Manual for the NETGEAR Storage Central SC101 Using Advanced Configuration Options To use Advanced Configuration, follow the steps below. 1. Click the icon, select Advanced Configuration, and click Next. Figure 6-1 2. Select a drive and click Next. The Advanced Configuration Options screen opens. 3. Select the task that you want to complete. Figure 6-2 6-2 v1.
Reference Manual for the NETGEAR Storage Central SC101 Checking Storage Central Status To use Advanced Configuration, follow the steps below. 1. Click the icon, select Advanced Configuration, and click Next. 2. Click the Check Storage Central Status button. Figure 6-3 The Status screen opens as shown to the right. Figure 6-4 6-3 v1.
Reference Manual for the NETGEAR Storage Central SC101 Creating or Managing Drives To create or modify drives, follow the instructions below. 1. From the Advanced Configuration Options screen, select Create/Manage drives. Figure 6-5 The screen shown to the right appears. 2. Select the drive that you want to work with and follow the onscreen instructions and prompts. This screen includes the following buttons: • Modify Drive • Detach Drive • Delete Drive • Create Drive Figure 6-6 6-4 v1.
Reference Manual for the NETGEAR Storage Central SC101 View/Attach Available Drive Use the Attach Available Drive feature in the following situations: • A shared drive is created on a PC. Other PCs must attach to it in order to use the drive. • The reset button was used to reset the SC101. This detaches all drives. • You detached a drive from a PC so that a different PC could use it. Note: If a drive has a password associated with it then you must know the password in order to attach the drive.
Reference Manual for the NETGEAR Storage Central SC101 6-6 v1.
Chapter 7 Troubleshooting This chapter provides information to help troubleshoot your Storage Central SC101. Basic functioning, troubleshooting tips, and frequently asked questions are included. Note: For up-to-date SC101 installation details and troubleshooting guidance visit http://kbserver.netgear.com. Basic Functioning If you have trouble setting up your SC101, check the tips below. The storage area network has no power • Make sure the power cord is connected to the storage area network.
Reference Manual for the NETGEAR Storage Central SC101 Common Problems and Solutions The table below lists common problems, and recommended actions. Problem Action The SC101 is not working. 1. Is the SC101 on, and does it have power? See “Restoring the Default Configuration” on page 7-6. 2. Is the SC101 status light lit? See page 2-4. 3. Is the SC101 connected correctly? See “Installation and Basic Configuration” on page 3-1. New installation: I cannot access SC101 from my computer. 1.
Reference Manual for the NETGEAR Storage Central SC101 What does the Reset button on the back panel do? When pressed once, it reboots the SC101 When pressed and held for more than six seconds, it resets the administrator password to default “password” and detaches all the letter drives. This is handy in case your PC dies and you need gain access to those private/non-shared drives previously-attached on that PC.
Reference Manual for the NETGEAR Storage Central SC101 I unplugged the disk from SC101 and plugged it to a PC. Why doesn’t the PC recognize the disk content? The data content saved on the Storage Central hard disk is NOT compatible with your personal computers. You can’t use the IDE hard disk on both your PC and the Storage Central device. Sometimes I lose the drive letter of the drive. How do I get it back? Detach the drive and attach it again.
Reference Manual for the NETGEAR Storage Central SC101 Can I un-mirror a mirrored drive? There is currently no option to remove mirroring for a mirrored drive. However, you can simply power-off the unit and unplug one of the hard disk and power it on. The mirrored drive on the plugged hard disk becomes a regular drive.
Reference Manual for the NETGEAR Storage Central SC101 I reconnect the CAT5 cable on SC101 to the router, then SCM can’t find SC101, and my drives get disconnected. Why? When SC101 detects a cable disconnection and reconnection, it will reboot itself automatically. Wait about two minutes for the reboot the complete. The Storage Central Status screen shows more drives than the Manage Drive screen. Why? Each time you create a mirrored drive, the SC101 adds two drives, one drive on each hard disk.
Appendix A Specifications This appendix provides the Storage Central SC101 technical specifications. Specifications for the SC101 Parameter Storage Central SC101 Network Management PC based SmartWizard Configuration Management software. Status LEDs Power/Ethernet LAN/Hard Disk Drive Dimensions: 6.75” x 4.25” x 5.
Reference Manual for the NETGEAR Storage Central SC101 A-2 v1.
Appendix B Related Documents This appendix provides links to reference documents you can use to gain a more complete understanding of the technologies used in your NETGEAR product. Document Link Internet Networking and TCP/IP Addressing: http://documentation.netgear.com/reference/enu/tcpip/index.htm Glossary: http://documentation.netgear.com/reference/enu/glossary/index.htm B-1 v1.
Reference Manual for the NETGEAR Storage Central SC101 B-2 v1.
