Installation Guide

Hardware Overview
1
2 3 4 5
6
7
Attach the Mounting
Base
Orbi Pro Router
(Model SRR60)
Ethernet cable
Power adapter
(varies by region)
Package Contents
Rubber feet
Ceiling-Mount Your
Orbi Pro
Wall bracket
1
2
1
1
2
3
4
Ceiling bracket
T-bracket with screw T-bracket screws
Wall anchors with screws
Mount base
Mount cover
Loosen the pre-installed screw on
the T-bracket so that the locking
plate on the T-bracket can slide.
Then secure the T-bracket to the
T-bar and tighten the screw.
2
Wall-Mount Your
Orbi Pro
Before you can wall mount or ceiling
mount your Orbi Pro router or satellite,
you must attach the mount base and
cover to your router or satellite.
Mount base
screws
1
Ring LED (not shown in image)
2
Sync button
(also used for WPS connection)
3
Internet port
(the Orbi Pro Satellite does not
include an Internet port)
4
Ethernet ports
5
Power On/Off button and
Power LED
6
DC Power connector
7
Reset button
1
Orbi Pro Router
Orbi Pro Satellite
2
4 5
6
7
PRO
Quick Start
Orbi Pro Satellite
(Model SRS60)
Note: The number of each item that
comes in your package depends on
which Orbi Pro kit you buy.
Attach the T-bracket to the ceiling
bracket with the T-bracket screws.

Summary of content (2 pages)