User's Manual

Manage the IoT WiFi network settings
You can set up four WiFi networks for your Orbi Pro network: one for administrative
access, one for employee access, one for Internet of things (IoT) devices, and one for
guest access.
When IoT devices connect to the IoT WiFi network, they cannot see other devices that
are connected to the network and cannot access the local area network (LAN).
Note: The router web interface calls the IoT WiFi network the Wireless 3 network.
Enable the IoT WiFi network and change the settings
Before you can set up the IoT WiFi network, you must enable it. You must be connected
to the admin network to enable the IoT WiFi network and change the settings.
When IoT devices connect to the IoT WiFi network, they cannot see other devices that
are connected to the network and cannot access the local area network (LAN).
Note: The router web interface calls the IoT WiFi network the Wireless 3 network.
To enable the IoT WiFi network and change the WiFi settings:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Wireless > Wireless 3.
The WiFi settings for the Wireless 3 network display on the page.
5. To enable the Wireless 3 network, select the Enable Wireless 3 network check box.
By default, the Wireless 3 network is disabled.
6. To broadcast the Wireless 3 network SSID, select the Enable SSID Broadcast check
box.
By default, the broadcast is enabled.
User Manual87Specify Network Settings
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60