User Manual
Table Of Contents
- Contents
- 1. Overview
- Supported Orbi Pro models
- Orbi Pro router and satellite hardware overviews
- LED behavior
- Wall mount or ceiling mount your Orbi Pro router
- Orbi Pro router label and Orbi Pro satellite label
- Connect your Orbi Pro router
- Place your satellite
- Sync your Orbi Pro satellite
- Manage and monitor your Orbi network with NETGEAR Insight
- 2. Connect to the Orbi Pro Network and Access the Router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually set up the Internet connection
- Manage an IPv6 Internet connection
- Requirements for entering IPv6 addresses
- Specify IPv6 Internet connections
- Use auto detection for an IPv6 Internet connection
- Use auto configuration for an IPv6 Internet connection
- Set up an IPv6 6to4 tunnel Internet connection
- Set up an IPv6 6rd tunnel Internet connection
- Set up an IPv6 pass-through Internet connection
- Set up an IPv6 fixed Internet connection
- Set up an IPv6 DHCP Internet connection
- Set up an IPv6 PPPoE Internet connection
- Change the MTU size
- 4. Control Access to the Internet
- Manage MAC access control lists for WiFi networks and the LAN
- Manage the Orbi network access control list
- Use keywords to block Internet sites
- Delete keywords that are used to block Internet sites
- Prevent blocking on a trusted computer
- Block services from the Internet
- Schedule when to block Internet sites and services
- Set up security event email notifications
- 5. Manage the LAN, WAN, and WiFi Settings
- View or change WAN settings
- Manage Dynamic DNS
- Set up a default DMZ server
- Change the router’s device name
- Change the LAN TCP/IP settings
- Use the router as a DHCP server
- Disable the DHCP server feature in the router
- Manage reserved LAN IP addresses
- Manage custom static routes
- Change the admin WiFi network settings
- Manage the employee WiFi network settings
- Manage the IoT WiFi network settings
- Set up a guest WiFi network and captive portal
- Manage the download bandwidth per SSID
- Manage the advanced WiFi settings
- Change the region of operation
- Enable or disable SSID broadcast for a radio
- Enable or disable 20/40 MHz coexistence for the 2.4 GHz radio
- Enable or disable Wi-Fi multimedia for a radio
- Change the CTS/RTS threshold and preamble mode for a radio
- Change the transmission output power for a radio
- Enable or disable daisy-chain topology
- Generate a new backhaul password
- Enable or disable implicit beamforming
- Enable or disable fast roaming
- Enable or disable MU-MIMO
- Enable or disable Protected Management Frames
- Use the router as a WiFi access point
- Set up router mode
- Check your Internet bandwidth
- Set up a bridge for a port group or VLAN profile
- Improve network connections with Universal Plug and Play
- 6. Manage and Monitor Your Orbi Pro System
- Update the router and satellite firmware
- Change the admin password
- Enable admin password reset
- Reset the admin password
- View router status and usage information
- Display Internet port statistics
- Check the Internet connection status
- View satellites, WiFi devices, and wired devices connected to the Orbi network
- View the satellite status in the satellite web interface
- View and manage logs of router activity
- Set up a syslog server
- Monitor Internet traffic
- Change the NTP server
- Set your time zone manually
- Manage the router configuration file
- Set up remote management
- Use remote access
- 7. Customize Internet Traffic Rules for Ports
- 8. Use VPN to Access Your Network
- 9. Troubleshooting
- A. Supplemental Information
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5.
Go to the section for the network for which you want to disable the MAC ACL.
6.
For the specific network, click the Enable MAC Access Control Enabled button.
The button changes to the gray Disabled button. The MAC ACL is disabled.
Manage the Orbi network access control list
You can use the network access control list (ACL) to block or allow access to the entire
Orbi network. An ACL functions with the MAC addresses of WiFi and wired devices that
the router detects on the Orbi network and that you can either allow access to your
network or deny access to your network. That is, the router can detect the MAC addresses
of devices that are or were connected to the Orbi network and list the MAC addresses
of these devices.
Note: The network access control list differs from a MAC ACL (see Manage MAC access
control lists for WiFi networks and the LAN on page 51). A MAC ACL is specific to a
particular WiFi network or to the wired network but is not based on devices that the
router detects on the entire Orbi network. With a MAC ACL, you can allow or deny
access to a device on a specific WiFi network or the wired network. The network access
control list and MAC ACLs are mutually exclusive. Use either the network access control
list or MAC ACLs.
If you set up a network ACL with an access rule that allows access to the Orbi network,
devices on the network ACL are an exception to the access rule:
•
A device for which you place the MAC address on the network ACL is denied access
to the Orbi network.
•
All other devices are allowed access to the Orbi network.
If you set up a network ACL with an access rule that denies access to the Orbi network,
devices on the network ACL are an exception to the access rule:
•
A device for which you place the MAC address on the network ACL is allowed access
to the Orbi network.
•
All other devices are denied access to the Orbi network.
User Manual56Control Access to the Internet
Orbi Pro Router Model SRR60 and Orbi Pro Satellite Model SRS60