Specifications

Virtual Private Networking Using IPSec Connections
175
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 108.
2. Complete the settings as explained the following table:
Table 42. RADIUS Client screen settings
Settings Description
Primary RADIUS Server
Select the Yes radio button to enable and configure the primary RADIUS server, and then enter the
settings for the three fields to the right. The default setting is that the No radio button is selected.
Primary Server IP Address The IP address of the primary RADIUS server.
Secret Phrase A shared secret phrase to authenticate the transactions between the client
and the primary RADIUS server. The same secret phrase needs to be
configured on both the client and the server.
Primary Server NAS
Identifier
The primary Network Access Server (NAS) identifier that needs to be
present in a RADIUS request.
Note: The VPN firewall functions as a NAS, allowing network access to
external users after verification of their authentication information. In a
RADIUS transaction, the NAS needs to provide a NAS identifier information
to the RADIUS server. Depending on the configuration of the RADIUS
server, the VPN firewall’s IP address might be sufficient as an identifier, or
the server might require a name, which you need to enter in this field.
Backup RADIUS Server
Select the Yes radio button to enable and configure the backup RADIUS server, and then enter the settings
for the three fields to the right. The default setting is that the No radio button is selected.