Specifications

Virtual Private Networking Using IPSec Connections
178
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 110.
3. Complete the settings as explained the following table:
Table 43. Add Mode Config Record screen settings
Settings Description
Client Pool
Record Name A descriptive name of the Mode Config record for identification and management
purposes.
First Pool Assign at least one range of IP pool addresses in the First Pool fields to enable the
VPN firewall to allocate these to remote VPN clients. The Second Pool and Third
Pool fields are optional To specify any client pool, enter the starting IP address for
the pool in the Start IP field and enter the ending IP address for the pool in the End
IP field.
Note: No IP pool should be within the local network IP addresses. Use a different
range of private IP addresses such as 172.173.xxx.xx.
Second Pool
Third Pool
WINS Server If there is a WINS server on the local network, enter its IP address in the Primary
field. You can enter the IP address of a second WINS server in the Secondary field.