Specifications

Monitoring System Access and Performance
278
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
VLAN ID The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
Configure a VLAN Profile on page 59). If the default VLAN profile is used, the
VLAN ID is 1, which means that all tagged and untagged traffic can pass on this
port.
MAC Address The MAC address of this port. All LAN ports share the same MAC address
(00:00:00:00:00:01). However, if LAN port 4 is enabled as the DMZ port, its MAC
address is changed to 00:00:00:00:00:06. For information about configuring the
DMZ port, see Configure and Enable the DMZ Port on page 72.
IP Address The IP address for this port. If the VLAN is not enabled on this port, the IP
address is the default LAN IP address (192.168.1.1). For information about
configuring VLAN profiles, see Configure a VLAN Profile on page 59.
Subnet Mask The subnet mask for this port. If the VLAN is not enabled on this port, the subnet
mask is the default LAN IP subnet mask (255.255.255.0). For information about
configuring VLAN profiles, see Configure a VLAN Profile on page 59.
DHCP Status The status can be either DHCP Enabled or DHCP Disabled. For information
about enabling DHCP for this port, see Configure a VLAN Profile on page 59.
WAN Info
The following fields are shown for each of the four WAN port.
WAN Mode The WAN mode can be Single Port, Load Balancing, or Auto Rollover. For
information about configuring the WAN mode, see Configure the WAN Mode on
page 32.
WAN State The WAN state can be either UP or DOWN, depending on whether the port is
connected to the Internet and whether the port is enabled. For information about
connecting WAN ports, see Configure the Internet Connections on page 24.
NAT The NAT state can be either Enabled or Disabled, depending on whether NAT is
enabled (see Configure Network Address Translation on page 33) or classical
routing is enabled (see Configure Classical Routing on page 33).
Connection Type The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on
whether the WAN address is obtained dynamically through a DHCP server or
assigned statically by you. For information about connection types, see
Configure the Internet Connections on page 24.
Connection State The connection state can be either Connected or Not Connected, depending on
whether the WAN port is physically connected to a modem or router. For
information about connecting a WAN port, see the ProSafe Gigabit Quad WAN
SSL VPN Firewall SRX5308 Installation Guide
.
WAN Connection Type The detected type of Internet connection that is used on this port. The WAN
connection type can be DSL, ADSL, CableModem, T1, or T3.
Upload Connection
Speed
The maximum upload speed that is provided by your ISP.
Download Connection
Speed
The maximum download speed that is provided by your ISP.
Table 69. Detailed Status screen information (continued)
Item Description