Specifications

Connecting the VPN Firewall to the Internet
50
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
 To add a priority QoS profile:
1. Select Network Configuration > QoS. The QoS screen displays.
2. Under the List of QoS Profiles table, click the Add table button. The Add QoS screen
displays. The following figure shows settings for a priority QoS profile:
Figure 27.
3. Enter the settings as explained in the following table:
Table 10. Add QoS screen settings for a priority profile
Setting Description
QoS Type Priority (for Rate Control, see Figure 26 on page 48 and Table 9 on page 48)
Interface From the drop-down list, select one of the WAN interfaces.
Service From the drop-down list, select a service or application to be covered by this
profile. If the service or application does not appear in the list, you need to
define it using the Services screen (see Services-Based Rules on page 83).
Direction From the drop-down list, select the direction to which the priority queue is
applied:
• Outbound Traffic. The priority queue is applied to outbound traffic only.
• Inbound Traffic. The priority queue is applied to inbound traffic only.
Diffserv QoS Match Enter a DSCP value in the range of 0 through 63. Packets are classified against
this value. Leave this field blank to disable packet matching.