Specifications

LAN Configuration

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308

3. Enter the settings as explained in the following table:

4. Click Apply to save your settings. The new static route is added to the Static Routes table.

 To edit a static route that is in the Static Routes table:

1. On the Routing screen (see Figure 39 on page 76), click the Edit button in the Action

column for the route that you want to modify. The Edit Static Route screen displays. This

screen is identical to the Add Static Route screen (see the previous screen).

2. Modify the settings as explained in the previous table.

3. Click Apply to save your settings.

 To delete one or more routes:

1. On the Routing screen (see Figure 39 on page 76), select the check box to the left of

the route that you want to delete, or click the Select All table button to select all routes.

2. Click the Delete table button.

Table 15. Add Static Route screen settings

Setting Description

Route Name The route name for the static route (for purposes of identification and

management).

Active To make the static route effective, select the Active check box.

Note: A route can be added to the table and made inactive, if not needed. This

allows routes to be used as needed without deleting and re-adding the entry. an

inactive route is not advertised if RIP is enabled.

Private If you want to limit access to the LAN only, select the Private check box. Doing so

prevents the static route from being advertised in RIP.

Destination IP Address The destination IP address of the host or network to which the route leads.

Subnet Mask The IP subnet mask of the host or network to which the route leads. If the

destination is a single host, enter 255.255.255.255.

Interface From the drop-down list, select the interface that is the physical network interface

(WAN1, WAN2, WAN3, WAN4, or DMZ) or virtual interface (VLAN profile) through

which the route is accessible.

Gateway IP Address The gateway IP address through which the destination host or network can be

reached.

Metric The priority of the route. Select a value between 2 and 15. If multiple routes to the

same destination exist, the route with the lowest metric is used.