Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
5-28 Firewall Security and Content Filtering
v1.0, January 2010
Enabling Source MAC Filtering (Address Filtering)
In the Address Filter submenu, the Source MAC Filter screen allows you to block traffic coming
from certain known machines or devices.
• By default, the source MAC address filter is disabled. Traffic received from any MAC address
is allowed.
• When source MAC address filtering is enabled, traffic will be dropped from any computers or
devices whose MAC addresses are listed in the Blocked MAC Addresses table.
To enable MAC filtering and add MAC addresses for blocking:
1. Select Security > Address Filter from the main/submenu. The Source MAC Filter screen is
displayed.
2. Click the Yes radio button to enable source MAC filtering.
Note: For additional ways of restricting outbound traffic, see “Outbound Rules
(Service Blocking)” on page 5-3.
Figure 5-16