Quick Reference Guide

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Firewall Security and Content Filtering 5-9
v1.0, January 2010
2. Configure the settings as explained in Table 5-1 on page 5-3.
3. Click Apply to save your changes. The new rule is added to the Outbound Services table on
the LAN WAN Rules screen.
Creating a LAN WAN Inbound Services Rule
The Inbound Services table lists all existing rules for inbound traffic. If you have not defined any
rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that allowing
inbound services opens holes in your firewall. Only enable those ports that are necessary for your
network.
To create a new inbound service rule in the LAN WAN Rules screen:
1. In the LAN WAN Rules screen, click add under the Inbound Services table. The Add LAN
WAN Inbound Service screen is displayed.
2. Configure the settings as explained in Table 5-2 on page 5-5.
3. Click Apply to save your changes. The new rule is added to the Inbound Services table on the
LAN WAN Rules screen.
Figure 5-3