Quick Reference Guide

104 | Chapter 4. Content Filtering and Optimizing Scans
ProSecure Web/Email Security Threat Management (STM) Appliance
Action SMTP From the SMTP drop-down list, select the action that is taken
when spam is detected by the antispam engine:
• Tag spam email. This is the default setting. The email is
tagged as spam, and a spam log entry is created.
• Block spam email. The email is blocked, and a spam log
entry is created.
• Quarantine spam email. The email is quarantined, a spam
log entry is created, and a spam quarantine log entry is
created.
POP3 The only option is to tag spam email. A spam log entry is also
created.
Tag Add tag to mail subject When you select the Tag spam email option from the Action
drop-down list (see earlier in this table), select this check box to
add a tag to the email subject line. The default tag is [SPAM], but
you can customize this tag. The default setting is to add the
default tag to the subject line.
Add tag
X-NETGEAR-SPAM to
mail header
When you select the Tag spam email option from the Action
drop-down list (see earlier in this table), select this check box to
add the X-NETGEAR-SPAM tag to the email header. The default
setting is to add the default tag to the email header.
Send Quarantine Spam Report
Note: Ensure that the email notification server (see Configuring the Email Notification Server on page 176)
is configured before you specify the quarantine spam report settings.
Enable Select this check box to enable the STM to send a quarantine spam report to the recipient
that you have specified on the Email Notification Server screen (see Configuring the
Email Notification Server on page 176).
Select one of the following radio buttons to specify the frequency with which the report is
sent:
• Weekly. Reports are sent weekly at the day and time that you specify from the
drop-down lists (weekday, hours, and minutes).
• Daily. Reports are sent daily at the time that you specify from the drop-down lists
(hours and minutes).
Table 31. Distributed Spam Analysis Settings (Continued)
Setting Description (or Subfield and Description)