Manual Unihan UPWL6031H2
1.General Description The UPWL6031H2 wireless module is a fully assembled and tested general-purpose module using the BCM4331wireless System-on-Chip(SoC). The module contains BCM4331 chip and all other necessary components to operate the UPWL6031H2. For detailed information on the UPWL6031H2 component itself, refer to the UPWL6031H2 datasheet. 2. Features Features Description Network Standard IEEE 802.11 b/g/n (final n) Chipset BCM4331 Input Voltage 3.3V Data Rate 802.11b: 1, 2, 5.5, 11Mbps 802.
Antenna Type Connector Gain (dBi) Remark Chain Ant. Brand Part Number 1 1 WNC 81.EZY15.GBR PCB U.FL 3 TX/RX 2 2 WNC 81.EZY15.GBR PCB U.FL 3 TX/RX 3 3 WNC 81.EZY15.GBR PCB U.FL 3 TX/RX 3. Benefits Small, self-contained SMT module. 3X3 MIMO function support High power solution support high speed transmittance For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.
About this guide This user guide contains the information your PEGATRON WIFI Module. System requirements Before installing the PEGATRON WIFI module, make sure that your system meets the following requirements: Intel® Pentium® 4 or AMD K7/K8 system Minimum 64MB system memory Windows® XP/VISTA operating system Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure.
Step 2
Step 3
Step 4
Step 5
