User manual

10
Set Up Your System
Camera LED Guide
The Arlo Go camera LED lights in dierent colors to indicate how the camera is
operating.
Camera LED
Solid blue
The camera is registered and is connected to
the mobile network.
Solid amber
No SIM card is inserted or the SIM card is damaged or not
active.
During a sync, the battery charge is low.
During the motion detection test, motion is detected.
Very slow blinking blue
The camera is powering on.
Blinking amber
Mobile network coverage is not available.
Slow blinking blue
The camera is ready to scan the QR code.
Slow blinking amber
The battery level is low.
Blinking blue
The camera is scanning the QR code.
Double blinking amber
The battery level is so low that it is critical.
Fast blinking blue
The camera is connected to the cloud.
During charging, blinking for three seconds
indicates that charging started and blinking
for two seconds indicates that charging is
complete.
Blinking amber and purple
The SD card type is invalid.
Blinking blue and purple
The camera is connecting to the network and
the cloud.
Blinking amber and blue
The camera is receiving a firmware upgrade.
Fast blinking amber
The camera connected to the cellular network but it
cannot connect to the cloud.
During a QR code scan, the scan failed.
During battery charging, the charge failed.
For more information about connecting to the cloud,
visit tinyurl.com/h8csb5a or scan this QR code: