User manual

9
Set Up Your System
6. Select Arlo Go.
The How to Sync page displays.
7. Press the Sync button on the camera.
You hear a click.
8. Tap or click Continue.
The Scan QR Code page displays.
9. Hold the QR code that the app displays 4 to 8 inches (10 to 20 cm) in front of
the camera until you hear a chime sound.
10. If you heard a chime sound, tap or click Yes, I heard a chime.
The Discover Device page displays.
11. Tap or click Continue.
Arlo discovers your Arlo Go camera.
12. If you hear a buzz or your camera LED blinks amber, the camera is not
connected to the cloud. Tap or click Did your hear a buzz or is your camera
LED blinking amber?
a. If the Unable to find page displays, tap or click Edit APN Information.
Follow the prompts. Contact your service provider for details.
b. If the Arlo Go Setup page displays, make sure that the SIM card was
activated and then tap or click Continue.
13. If the Account Setup page displays, do the following:
a. Enter your account settings and tap or click Continue.
b. When prompted, select a service plan.
Note: For more information, see Subscription Plans on page 53.
Your Arlo Go camera is set up.