User's Manual
Table Of Contents
- Contents
- 1. Hardware Overview of the Access Point
- 2. Install and Access the Access Point in Your Network
- Position Your Access Point
- Set Up and Connect the Access Point to Your Router or DHCP Server
- Connect and Log In to the Access Point for Initial Configuration
- Log In to the Access Point After Setup to View or Change Settings
- Change the Language
- Change the admin Password
- Set Up Password Recovery
- Set the Time Zone and Adjust the Daylight Saving Time
- Connect a Wired or WiFi Device to the Access Point’s Network After Installation
- 3. Manage the Basic WiFi Network Settings
- 4. Manage the Access Point and Monitor the Traffic
- Update the Firmware of the Access Point
- Manage the Configuration File of the Access Point
- Recover the admin Password
- Return the Access Point to Its Factory Default Settings
- Change the IP Address Settings of the Access Point
- View Devices Currently on the Network
- View the Status and Statistics of the Access Point
- View or Clear the Logs
- 5. Manage the Advanced WiFi Features
- 6. Troubleshooting
- A. Factory Default Settings and Technical Specifications
The user name is admin. The default password is password.The user name and password are
case-sensitive.
The Home page displays.
3. Select Advanced Setup > Advanced Wireless Settings.
The Advanced Wireless Settings page displays.
4. Scroll down to the bottom of the page and click the Set Up Access List button.
If you did not yet add any WiFi devices to the access list, the table does not show any.
5. Click the Add button.
The Available Wireless Client List shows the detected WiFi devices with their device name and MAC
addresses.
6. To add a device to the allowed list, either select the radio button of a WiFi device on the Available
Wireless Client List or, if the WiFi device does not show on the Available Wireless Client List, enter the
device name in the Device Name field and the MAC address in the MAC Address field.
7. Click the Add button.
The WiFi device that you added shows in the table on the Wireless Client Access List, that is, it is added
to the access control list.
The radio button for the WiFi device lets you select the device if you want to change (edit) it or remove
it from the access control list.
8. To add another WiFi device to the access control list, repeat Step 5 through Step 7.
Manage the Advanced WiFi Features
53
802.11ac Wireless Access Point Model WAC104